
05527 - Aerospace TIG Welder – Entry Level
Job description
Aerospace TIG Welder – Entry Level
Employment Type: Direct Hire Position Type: Full-Time, Hourly Work Location: Kent, Washington Work Arrangement: Onsite Pay Range: $21.55–$27.00 per hour, depending on qualifications; hiring is targeted toward the lower portion of the range Open Positions: 4 — two Day Shift and two Swing Shift Schedule: Monday–Thursday; four 10-hour shifts Day Shift: Approximately 3:30 AM or 4:00 AM start; exact hours to be confirmed Swing Shift: 2:30 PM–1:00 AM Experience Required: Entry level; no minimum years of experience specified Education Required: High school diploma or GED and a Welding Technology degree or welding certificate Citizenship: U.S. Citizenship required
Position Overview
We are seeking entry-level Aerospace TIG Welders to join sheet metal aircraft components using established welding processes, written instructions, weld schedules, and engineering drawings. This position primarily involves TIG welding thin titanium and nickel alloys, typically approximately 0.030–0.080 inches thick. The selected candidates will prepare weld surfaces, fit assemblies, perform welding operations, and visually and dimensionally inspect completed work to verify compliance with specifications. The ideal candidate will have relevant welding education, strong manual dexterity, attention to detail, and a willingness to learn and refine welding techniques. Candidates must be able to collaborate with team members and seek clarification when needed.
Essential Duties and Responsibilities
- Apply basic TIG welding processes to join sheet metal aircraft components.
- Complete routine and some advanced welding tasks using established practices and procedures.
- Prepare weld surfaces and components before welding.
- Fit assemblies according to applicable instructions and specifications.
- Interpret and follow written instructions, sketches, weld schedules, drawings, and related documentation.
- Visually and dimensionally inspect completed work for compliance with specifications.
- Repair assigned parts as authorized.
- Evaluate completed work to identify opportunities for quality improvement.
- Perform work according to established quality standards and safety procedures.
- Complete the required company TIG welding training program or demonstrate equivalent experience.
- Obtain and maintain required company welding qualifications and certifications, including fillet welding qualifications as applicable.
- Meet established operational standards for efficiency and product quality.
- Read and interpret router operations, blueprints, sketches, and specifications needed to complete assigned work.
- Use machine tools, precision instruments, and measuring equipment as required.
- Apply mathematics relevant to welding operations.
- Work under limited oversight and seek clarification when instructions or requirements are unclear.
- Support different work areas as skills and experience develop.
- Share relevant prior job knowledge and assist with training others when appropriate.
Required Qualifications
- High school diploma or GED.
- Welding Technology degree or welding certificate.
- U.S. Citizenship required.
- Ability to read and interpret written instructions, sketches, weld schedules, blueprints, and specifications.
- Basic knowledge of Geometric Dimensioning and Tolerancing (GD&T), including the ability to locate information and request assistance when needed.
- Ability to perform mathematical calculations relevant to welding functions.
- Familiarity with machine tools and precision measuring instruments.
- Manual dexterity sufficient to perform detailed welding and assembly tasks.
- Ability to inspect completed work and identify quality concerns.
- Willingness to complete required welding training and obtain applicable company welding qualifications.
- Ability to work effectively as part of a team.
- Ability to recognize when to stop work and seek guidance.
- Ability to follow established safety procedures and use required protective equipment.
- Ability to work onsite in Kent, Washington.
- Availability to work an assigned Day Shift or Swing Shift schedule, Monday–Thursday.
Physical Requirements
- Ability to perform physical activities involving considerable use of the arms and legs and frequent whole-body movement.
- Ability to climb, balance, lift, and handle materials as required.
- Ability to lift materials weighing up to 50 pounds.
- Manual dexterity sufficient to handle welding tools, components, and precision instruments.
- Ability to wear required protective clothing, goggles, welding helmets, and other protective equipment.
Work Environment
- Onsite aerospace welding and manufacturing environment in Kent, Washington.
- Work involves sheet metal aircraft components and thin titanium and nickel alloys.
- Regular use of welding equipment, machine tools, and precision measuring instruments.
- Required use of protective clothing, goggles, helmets with protective lenses, and other equipment to prevent burns and eye injuries.
- Four-day workweek, Monday–Thursday, consisting of four 10-hour shifts.
- Day Shift begins approximately 3:30 AM or 4:00 AM; exact hours will be confirmed.
- Swing Shift operates from 2:30 PM–1:00 AM.
- Strong emphasis on safety, product quality, teamwork, and continuous improvement.
Key Competencies
- TIG welding fundamentals
- Aerospace sheet metal welding
- Thin titanium and nickel alloy welding
- Weld surface preparation
- Assembly fitting
- Blueprint and weld schedule interpretation
- Visual and dimensional inspection
- Precision measuring instrument use
- Basic GD&T
- Welding mathematics
- Manual dexterity
- Attention to detail and product quality
- Safety awareness
- Teamwork and communication
- Adaptability and willingness to learn
- Continuous improvement
Job details
- Published
- November 6, 2026
- Last checked
- November 17, 2026
- Job source
- breezy
- Workplace
- On-site · Kent, AU
- First seen
- November 6, 2026
LiftmyCV exclusive data
Crafted Staff hiring intelligence
Crafted Staff currently has 44 active jobs tracked by LiftmyCV. 11 new jobs in the past 7 days.
Verified November 17, 2026
Active openings
44
Currently tracked by LiftmyCV
New in 7 days
11
25 new jobs in the past 30 days
Published salaries
64%
Median disclosed salary: $88,250
Average opening age
21 days
Across 44 active openings
Workplace breakdown
Hiring countries
Top hiring cities
Most in-demand roles
- • CDL-A Drivers & Owner Operators – Texas Oilfield & Dry Bulk Hauling
- • 0532 - Maintenance Technician - Industrial Manufacturing
- • 0533 - CNC Programmer
- • 0534 - Quality Manager
- • 05435 - Purchasing Specialist
- • 05436 - Senior Machinist
Frequently requested skills
Median disclosed salary: $88,250 · 64% of jobs publish a salary
As of November 18, 2026
Hiring insights calculated from active jobs tracked by LiftmyCV.
See how well you match this job
Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.
Sign up to see your matchAlready have an account? Log inMore at Crafted Staff
Similar jobs from this company
Across the market
Similar jobs from other companies
- Aerospace WelderAPM ManufacturingOrange, USOn-site$58,140–$79,080 per year
- Welder (Aerospace)TAT Technologies LtdTulsa, USOn-site
- Welder – Aerospace ManufacturingMachina LabsChatsworth, USOn-site
- Aerospace Structural WelderpaeCA, USOn-site
- Aerospace Aluminum Welder (TIG)graviticsspaceGreater Seattle AreaOn-site
- Welder/Fitter – Aerospace ManufacturingMachina LabsChatsworth, USOn-site
Related job searches
Third-party content disclaimer
Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.
LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.
LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.
If you prefer, you may apply directly via the original listing for transparency.