LiftmyCVLiftmyCV

Assembly (Mechanical) - 2nd Shift

Maxcess InternationalKeene, US
AI job summary

Maxcess International seeks a skilled Assembler to join the Keene manufacturing team. This role involves the assembly and inspection of shafts and accessories, requiring critical thinking and attention to detail. Responsibilities include polishing, prepping, assembling components, conducting final inspections, and adhering to safety procedures. The ideal candidate should be flexible to assist in various manufacturing areas as needed and must maintain a neat working environment. Maxcess values diversity and inclusion, encouraging all qualified candidates to apply.

Job description

The Assembly Department is a part of the Keene manufacturing team whose primary responsibility is the cutting, straightening, pre-assembling and assembling of shafts and accessories, as well as final inspection. The Assembler is a highly skilled manual role requiring attention to detail, critical thinking and adherence to assembly drawings. As with all other roles within Tidland Keene, this individual must adhere to all documented safety and manufacturing policies and procedures, as well as be flexible enough to assist in other areas as business needs dictate.

SPECIFIC RESPONSIBILITIES

  • Polish, roll stamp and deburr bodies.
  • Prep bodies for assembly including cleaning ID of body, removal of burrs on ID of body.
  • Straighten internal leaves/lugs, splitting and finishing ends as required.
  • Prep journals for assembly by cleaning out tube socket and air hole. Install connector and valve.
  • Obtain pre-packed parts from holding area and verify correct part numbers as identified on material list.
  • Drill and tap side valve according to engineering prints and established procedures.
  • Drill and tap set screws according to engineering prints following established procedures.
  • Assemble shafts according to engineering prints following established procedures.
  • Install accessory parts listed on Material List/Inspection Report (i.e. pins, bearing races, and drive ends).
  • Assemble bearing housings according to print and procedure.
  • Hand stamp as required.
  • Final inspection of products to verify dimensions, function, quality and appearance.
  • Fill out required inspection reports, accepted stickers, and quality audit reports.
  • Inform supervision of any non-conformities found during inspection.
  • Install serial number tags as required.
  • Disassemble and inspect repair product completing required inspection form.
  • Perform repairs on product according to Sales Order.
  • Move completed product work to proper holding area with identifying paperwork according to established procedures.
  • Maintain neat and clean working area. Notify supervisor of any equipment defects.
  • Maintain and record time sheets for each operations performed.
  • Wear and maintain proper safety equipment including proper footwear, safety glasses, and hearing protection where required.
  • Assist in other areas of manufacturing as required.
  • Work in a safe manner at all times following established policies and procedures.

#IND Maxcess is an equal employment opportunity employer. We do not discriminate on the basis of race, religion, sex, disability, age, pregnancy, national origin, sexual orientation, or any other characteristic protected by applicable law. We are committed to diversity and inclusion, and all qualified candidates are encouraged to apply.

Responsibilities

Polish, roll stamp and deburr bodies. Prep bodies for assembly including cleaning ID of body, removal of burrs on ID of body. Straighten internal leaves/lugs, splitting and finishing ends as required. Prep journals for assembly by cleaning out tube socket and air hole. Install connector and valve. Obtain pre-packed parts from holding area and verify correct part numbers as identified on material list. Drill and tap side valve according to engineering prints and established procedures. Drill and tap set screws according to engineering prints following established procedures. Assemble shafts according to engineering prints following established procedures. Install accessory parts listed on Material List/Inspection Report (i.e. pins, bearing races, and drive ends). Assemble bearing housings according to print and procedure. Hand stamp as required. Final inspection of products to verify dimensions, function, quality and appearance. Fill out required inspection reports, accepted stickers, and quality audit reports. Inform supervision of any non-conformities found during inspection. Install serial number tags as required. Disassemble and inspect repair product completing required inspection form. Perform repairs on product according to Sales Order. Move completed product work to proper holding area with identifying paperwork according to established procedures. Maintain neat and clean working area. Notify supervisor of any equipment defects. Maintain and record time sheets for each operations performed. Wear and maintain proper safety equipment including proper footwear, safety glasses, and hearing protection where required. Assist in other areas of manufacturing as required. Work in a safe manner at all times following established policies and procedures.

Job details

Published
October 13, 2026
Last checked
November 18, 2026
Job source
greenhouse
First seen
October 14, 2026

LiftmyCV exclusive data

Maxcess International hiring intelligence

Maxcess International currently has 12 active jobs tracked by LiftmyCV. 0 new jobs in the past 7 days.

Verified November 18, 2026

Active openings

12

Currently tracked by LiftmyCV

New in 7 days

0

5 new jobs in the past 30 days

Published salaries

8%

Median disclosed salary: $64,480

Average opening age

84 days

Across 12 active openings

Workplace breakdown

Remote0%
Hybrid0%
On-site100%

Hiring countries

United States of America
Australia

Top hiring cities

Keene
Eureka
Melrose Park
Camas
Meadows of Dan
Oklahoma City

Most in-demand roles

  • • Assembly (Mechanical) - 2nd Shift
  • • CAD Designer II
  • • CNC Operator - Initial Turn - 1st shift
  • • CNC Operator - Mill Finishing 3rd Shift
  • • CNC VMC Setup Machinist / MAZATROL Programmer
  • • Electrical Engineer II

Frequently requested skills

precision measuring instruments
arc flash prevention
Chemistry
electrical panel design
EMI
engineering drawings
Environmental Science
Ethernet based networking

Median disclosed salary: $64,480 · 8% of jobs publish a salary

As of November 18, 2026

Hiring insights calculated from active jobs tracked by LiftmyCV.

AI match explained

See how well you match this job

Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.

Sign up to see your matchAlready have an account? Log in

More at Maxcess International

Similar jobs from this company

Across the market

Similar jobs from other companies

Third-party content disclaimer

Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.

LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.

LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.

If you prefer, you may apply directly via the original listing for transparency.