Electrical Engineer (Prism)
Northwood is a modern space infrastructure company focused on delivering advanced communication technologies for satellite missions ranging from national security to disaster response. They are seeking an Electrical Engineer to manage the design of non-RF electronics for Prism, a 2.4-meter parabolic antenna. This role involves tasks from schematic design and layout to hardware verification, emphasizing high-speed digital circuits and integrated power solutions. Ideal candidates will have a bachelor's in electrical engineering and relevant experience in high-speed digital systems.
Job description
About Northwood:
Northwood is a modern space infrastructure company bringing the benefits of space to the masses through advanced communications technology. We are building a global network of phased array and parabolic ground stations that enable real-time, reliable communication for satellite missions such as national security, global connectivity, and disaster response. With a vertically integrated approach, Northwood designs, builds, and rapidly deploys scalable systems that power the next generation of space missions. If you like solving complex challenges and seeing your work deployed around the world with real impact, Northwood is the place to do it.
Role:
Northwood is looking for an Electrical Engineer to own the non-RF electronics design for Prism, our 2.4-meter parabolic antenna for high-throughput satellite links. You will design the digital compute, power, embedded, and mixed-signal hardware that sits alongside Prism's RF chain- from block diagram and component selection through schematic, layout, bring-up, and production release.
Responsibilities
- Own the electrical design of Prism's non-RF electronics: high-speed digital, power electronics, embedded control, and mixed-signal circuits
- Architect and design high-density boards built around FPGAs, microcontrollers, high-speed data converters, and their peripherals, including DDR memory, multi-gigabit SerDes, and 10/100G Ethernet
- Define clocking architectures: reference selection, clock distribution, jitter budgets, and synchronization across boards and subsystems
- Design power trees end to end, from input power and conversion stages to point-of-load regulators, sequencing, monitoring, and protection
- Design mixed-signal interfaces between digital and analog/RF domains, including ADC/DAC front ends, control loops, and sensor and telemetry circuits
- Drive schematic capture, define PCB stack-ups, and lead layout of complex multilayer boards with a focus on signal integrity, power integrity, and EMI/EMC
- Lead board bring-up and design verification, characterizing performance in the lab and iterating designs for performance, cost, and manufacturability
Basic Qualifications
- Bachelor's degree in electrical engineering or a related engineering discipline
- 3-4 years of professional experience designing electronics hardware, with ownership of boards from schematic through bring-up
- Hands-on design experience with high-speed digital systems built around FPGAs and/or microcontrollers
- Experience designing board-level clocking and power distribution for complex digital systems
- Proficiency in schematic capture, PCB stack-up definition, and layout of complex multilayer boards
- Working knowledge of signal integrity, power integrity, and EMI/EMC design practices
Preferred Qualifications
- Design experience with dense, high-pin-count FPGAs (e.g., AMD/Xilinx UltraScale+ or RFSoC) and the DDR, SerDes, and JESD204B/C interfaces around them
- Low-jitter clock design: PLLs, jitter cleaners, clock fan-out, and clocking for high-speed data converters
- Power electronics design: DC-DC converters, multiphase and point-of-load regulators, sequencing, hot-swap, and protection circuits
- Embedded hardware design for microcontroller-based control and monitoring, with common interfaces such as I2C, SPI, UART, CAN, and Ethernet
- Mixed-signal design, including precision analog, data converter front ends, and sensor interfaces
- Lab skills with oscilloscopes, spectrum and network analyzers, and electronic loads, plus soldering and hot air rework
- Python (or similar) for test automation and data analysis
Additional Information:
To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Northwood Space is an Equal Opportunity Employer; employment with Northwood Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know at
Job details
- Published
- November 7, 2026
- Job source
- ashby
- Workplace
- On-site · Torrance, US
- First seen
- November 7, 2026
Requirements
Bachelor's degree in electrical engineering or a related engineering discipline; 3-4 years of professional experience designing electronics hardware; Hands-on design experience with high-speed digital systems; Experience designing board-level clocking and power distribution; Proficiency in schematic capture, PCB stack-up definition, and layout of complex multilayer boards; Working knowledge of signal integrity, power integrity, and EMI/EMC design practices.
Skills mentioned in this job
See how well you match this job
Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.
Sign up to see your matchAlready have an account? Log inMore at Northwood Space
Similar jobs from this company
- Senior RF Electrical Engineer (Amplifiers)Northwood SpaceTorrance, USOn-site
- Development Test Engineer (Prism)Northwood SpaceTorrance, USOn-site$100,000–$119,000 per year
- Electrical Engineer, Lifecycle (Prism)Northwood SpaceTorrance, USOn-site
- Senior Electrical Engineer, Lifecycle (Prism)Northwood SpaceTorrance, USOn-site
- Electrical Engineer (New Grad)Northwood SpaceTorrance, USOn-site
- Mechanical Engineer (Prism)Northwood SpaceTorrance, USOn-site
Across the market
Similar jobs from other companies
- Workday Prism ConsultantJade Global Software Pvt LTDPune, INOn-site
- Blue Prism DeveloperNexthireMumbai, INOn-site
- Prism Project assistantBall State UniversityBall State UniversityOn-site
- Head of Prism OperationsClearwater Analytics, LLCBoise, USOn-site$100,000–$120,000 per year
- Engineering Lead - PrismNorthwood SpaceTorrance, USOn-site
- Blue Prism Platform ManagerP&G Polska SP.Z O.OWarsaw, PLHybrid
Related job searches
Third-party content disclaimer
Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.
LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.
LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.
If you prefer, you may apply directly via the original listing for transparency.