LiftmyCVLiftmyCV
NI

Hardware Design/Test Engineer

NXP India Pvt. Ltd. - NoidaOn-siteNoida, IN
AI job summary

Join NXP's Hardware Solutions Competency Center as a Hardware Design/Test Engineer. This role involves managing the complete hardware lifecycle, from circuit design to testing and validation of hardware boards. Collaborate with cross-functional teams to ensure compliance and reliability. With 3-5 years of relevant experience, you will engage in tasks including PCB implementation, debugging, and EMI/EMC support. Ideal candidates should have hands-on experience with analog and digital circuits, PCB design tools, and laboratory equipment. A Bachelor’s or Master’s degree in Electronics/Electrical Engineering is preferred.

Job description

ABOUT THE ROLE

Hardware Solutions Competency Center (HWS-CC) is a central team within NXP’s Global Operations Engineering (GOE) organization responsible for design, manufacturing, compliance and supply chain operations of hardware boards. The organization provides hardware solutions to all business units within NXP through its global presence in North America, Europe, and Asia. Board types include customer reference design, silicon validation, failure analysis, and reliability applications. The role spans the full hardware lifecycle: requirements capture, circuit design, PCB coordination, prototype bring-up, functional and electrical validation, EMI/EMC support, and sustaining engineering. You will independently own defined circuit blocks and validation activities while working with senior engineers on complex architecture and system-level decisions. KEY RESPONSIBILITIES

Circuit Design & Architecture

  • Understand technical requirements and contribute to board-level architecture and component selection.
  • Design analog, digital, power-supply, clock, reset, boot-configuration, and interface circuits.
  • Develop and review schematics for microcontroller-, microprocessor-, or SoC-based hardware.
  • Read and interpret component datasheets, reference manuals, design guidelines, and interface specifications.

PCB Implementation

  • Define PCB placement, routing, stack-up, grounding, impedance, and power-distribution requirements.
  • Coordinate with PCB layout engineers and participate in schematic and layout reviews.
  • Apply design-for-manufacturing, design-for-test, reliability, and component-derating guidelines.
  • Maintain design data in PDM/PLM or version-control systems; support ECOs and NPI activities.

Bring-Up & Debug

  • Prepare board bring-up plans and perform initial power, clock, reset, boot, and interface validation.
  • Debug board-level issues using schematics, PCB files, measurements, firmware logs, and component documentation.
  • Use laboratory equipment including oscilloscopes, DMMs, logic analyzers, programmable power supplies, electronic loads, protocol analyzers, and JTAG/boundary-scan debug tools.

Test & Validation

  • Develop and execute functional, electrical, interface, power, thermal, and margin test procedures.
  • Document test setups, measurements, observations, failures, root causes, and corrective actions.
  • Leverage basic scripting (Python or similar) for test automation, data logging, or measurement analysis.

EMI/EMC & Compliance

  • Support EMI/EMC design reviews covering grounding, shielding, filtering, return paths, and interface protection.
  • Participate in pre-compliance and certification testing (radiated/conducted emissions, immunity, ESD, electrical safety, environmental compliance).
  • Work with compliance laboratories and internal teams to investigate certification failures and validate corrective actions.

Cross-Functional Collaboration & Project Support

  • Collaborate with PCB layout, firmware, software, mechanical, thermal, manufacturing, and compliance teams.
  • Support prototype builds, component replacements, board revisions, and sustaining-engineering activities.
  • Provide effort estimates, proactively flag design risks and component availability issues, and communicate technical status to the project lead.

REQUIRED EXPERIENCE AND SKILLS

  • Location: Noida
  • 3-5 years of relevant experience in board-level hardware design, bring-up, testing, or validation.
  • Hands-on experience designing and debugging analog and digital electronic circuits.
  • Experience with microcontrollers, processors, SoCs, memories, PMICs, voltage regulators, clock devices, and standard board-level peripherals.
  • Practical experience in schematic capture and PCB design review using tools such as Cadence OrCAD/Allegro, or equivalent.
  • Understanding of multilayer PCB design: grounding, return paths, controlled impedance, decoupling, and power distribution.
  • Experience bringing up prototype boards and troubleshooting power, clock, reset, boot, memory, and interface-related issues.
  • Working knowledge of commonly used interfaces: UART, I2C, SPI, USB, Ethernet, CAN, JTAG, SD/eMMC, SMBus, or PMBus.
  • Working familiarity with multiple high-speed interface (PCIe, DDR4/5, LPDDR, high-speed USB, or SerDes); ability to interpret SI simulation results and apply termination/routing guidelines.
  • Experience using laboratory equipment: oscilloscopes, DMMs, logic analyzers, programmable power supplies, electronic loads, protocol analyzers, and JTAG/boundary-scan debug tools.
  • Working understanding of signal integrity, power integrity, transmission-line effects, termination, crosstalk, and timing.
  • Practical understanding of EMI/EMC design practices: filtering, shielding, grounding, ESD protection, and noise reduction.
  • Exposure to EMI/EMC pre-compliance or certification testing; ability to support debugging.
  • Familiarity with certification standards such as CISPR, IEC, FCC, CE, automotive, or industry-specific requirements (expertise in all standards is not expected).
  • Ability to prepare clear design documents, test procedures, validation reports, and failure-analysis reports.
  • Strong troubleshooting, analytical, communication(written/Oral), and cross-functional collaboration skills.

PREFERRED QUALIFICATIONS

  • Education: Bachelor’s/master’s degree in Electronics/Electrical Engineering or equivalent
  • Experience with embedded, automotive, industrial, consumer, networking, or semiconductor evaluation hardware.
  • Basic scripting ability (Python, MATLAB, or similar) for test automation, data logging, or measurement analysis.
  • Exposure to SPICE simulation or signal/power integrity analysis tools.
  • Experience supporting products through prototype, validation, certification, and production stages.
  • Familiarity with PCB fabrication, assembly, manufacturing test, and component qualification.
  • Exposure to environmental and reliability testing: temperature, vibration, thermal cycling, or humidity.
  • Experience working with external design partners, PCB manufacturers, test laboratories, or component suppliers.

EXPECTED LEVEL OF OWNERSHIP

Within HWS-CC, this engineer will be expected to:

  • Independently design and validate assigned circuit blocks.
  • Coordinate PCB implementation for assigned portions of the design.
  • Bring up and debug prototype hardware with limited supervision.
  • Prepare and execute test plans for assigned functions and interfaces.
  • Support EMI/EMC investigation and certification activities as part of a larger engineering team.
  • Proactively flag design risks, schedule impacts, and component availability issues before they become blockers.
  • Escalate architecture, high-speed design, safety, and complex compliance issues to senior technical experts.
  • Maintain accurate design, test, and issue-tracking documentation.

More information about NXP in India... #LI-29f4

Job details

Published
October 30, 2026
Job source
myworkdayjobs
Workplace
On-site · Noida, IN
First seen
October 31, 2026

Skills mentioned in this job

circuit designPCB implementationEMI/EMCschematic capturedebuggingPython
AI match explained

See how well you match this job

Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.

Sign up to see your matchAlready have an account? Log in

More at NXP India Pvt. Ltd. - Noida

Similar jobs from this company

Across the market

Similar jobs from other companies

Related job searches

Third-party content disclaimer

Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.

LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.

LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.

If you prefer, you may apply directly via the original listing for transparency.