
Manual Machinist
Qualdoc is seeking an experienced Manual Machinist to operate milling and turning equipment in a hands-on role. This position requires the ability to interpret technical drawings, set up machining tools, and ensure precision in part production. Responsibilities include reviewing blueprints, performing machining operations, and maintaining quality through inspections. Candidates should have strong manufacturing backgrounds, CNC certification, and familiarity with machining tools and GD&T. This role is based in Richmond, VA, in an indoor manufacturing environment.
Job description
Manual Machinist
Location: Richmond, VA Job Type: Contract-to-Hire Shifts: 1st and 2nd Shift Starting Pay: $28.00/hour; higher depending on experience
Position Overview
We are seeking an experienced Manual Machinist with a strong manufacturing background to set up and operate manual milling and turning equipment. This is a hands-on machining position, not a machine operator role. The ideal candidate can independently interpret technical drawings, select and install tooling, adjust machine settings, troubleshoot machining issues, and produce precision parts that meet required measurements and tolerances.
Key Responsibilities
- Review work orders, blueprints, engineering drawings, material specifications, and machining instructions to determine job requirements.
- Interpret orthographic drawings, reference planes, surface locations, and geometric dimensioning and tolerancing (GD&T).
- Set up and adjust mills and lathes, including three-jaw and four-jaw chucks, collets, bushings, cams, gears, stops, attachments, and stock pushers.
- Install cutting tools, indicate vises, and tram machine heads to ensure proper alignment.
- Program mills and lathes by entering machine instructions, setting zero and reference points, tool registers, offsets, and compensation settings.
- Apply basic math, geometry, and trigonometry when calculating machining requirements and verifying programs.
- Load and position raw materials into machine feed systems.
- Inspect initial runs and sample parts by checking measurements, machine positions, and dimensional accuracy against required specifications.
- Perform machining operations such as drilling, grooving, cutting, turning, facing, knurling, and thread chasing.
- Monitor machining processes, take measurements, and make necessary machine adjustments to maintain quality and accuracy.
- Identify equipment or process issues, troubleshoot problems, and adjust or reprogram machine controls as needed.
- Sharpen and replace worn cutting tools and follow established quality assurance procedures.
- Maintain a safe work environment by following applicable safety procedures and regulations.
- Perform preventive maintenance, troubleshoot equipment problems, and coordinate repairs when necessary.
- Document completed work, equipment issues, and outstanding tasks to ensure smooth communication between shifts.
- Stay current with machining techniques and equipment through technical publications and ongoing learning.
- Take ownership of assigned work and contribute to production goals and process improvements.
Qualifications & Skills
- CNC certification required.
- CNC programming experience is a plus.
- Strong background in manufacturing and machining.
- Experience setting up and working with mills and lathes.
- Ability to read and interpret blueprints, engineering drawings, and technical specifications.
- Knowledge of machining tools, controls, instrumentation, and tooling.
- Understanding of GD&T and dimensional measurements.
- Ability to perform basic mathematical calculations, including geometry and trigonometry.
- Strong attention to detail, sound judgment, and problem-solving abilities.
- Good verbal communication and technical skills.
- Ability to identify process improvements and work independently.
Work Environment & Physical Requirements
- Primarily indoor manufacturing environment (approximately 95% indoors and 5% outdoors).
- The facility is heated during winter but does not have air conditioning during summer.
- Must be able to stand on concrete floors for at least eight hours per shift.
- Work may involve kneeling, squatting, bending, and standing for extended periods.
- Noise levels may occasionally increase near grinding and machine-testing areas. Earplugs are provided when needed.
Required Tools & Safety Equipment
- Must provide basic personal hand tools, including:
- Box, open-end, and socket wrench sets
- Allen wrench set
- Screwdriver set
- Tap handles
- Pliers
- Combination square
- 9-inch level
- Tape measure
- Both English and metric tool sets are recommended.
- A lockable toolbox is also recommended.
- Safety glasses and steel-toed safety shoes are required.
- Long pants and a sleeved shirt (at least short-sleeved) must be worn.
Responsibilities
Review work orders, blueprints, interpret drawings, adjust mills and lathes, program machine instructions, apply mathematics for machining requirements, load materials, inspect parts, troubleshoot issues, and maintain a safe work environment.
Job details
- Published
- November 15, 2026
- Last checked
- November 21, 2026
- Job source
- lever
- Workplace
- On-site · Richmond, VA
- First seen
- November 16, 2026
Requirements
CNC certification required; experience with mills and lathes, ability to read blueprints, knowledge of machining tools, GD&T understanding, and strong problem-solving abilities.
Skills mentioned in this job
LiftmyCV exclusive data
Qualdoc hiring intelligence
Qualdoc currently has 53 active jobs tracked by LiftmyCV. 31 new jobs in the past 7 days.
Verified November 21, 2026
Active openings
53
Currently tracked by LiftmyCV
New in 7 days
31
52 new jobs in the past 30 days
Published salaries
26%
Median disclosed salary: $57,200
Average opening age
7 days
Across 53 active openings
Workplace breakdown
Hiring countries
Top hiring cities
Most in-demand roles
- • Assistant Field Operations Manager
- • CDL-A Equipment Operator
- • CDL-A Heavy Equipment Operator
- • Diesel & Heavy Equipment Technician
- • CDL-A Construction Equipment Operator
- • CDL-A Heavy Equipment Operator / Laborer
Frequently requested skills
Median disclosed salary: $57,200 · 26% of jobs publish a salary
As of November 21, 2026
Hiring insights calculated from active jobs tracked by LiftmyCV.
See how well you match this job
Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.
Sign up to see your matchAlready have an account? Log inMore at Qualdoc
Similar jobs from this company
Across the market
Similar jobs from other companies
- Manual MachinistFlowserve US IncBridgeville, USOn-site
- Manual MachinistEnerstaffPasadena, USOn-site$58,240 per year
- Manual MachinistSulzer Pump Services (US) Inc.Salt Lake City, USOn-site
- Manual MachinistITI Indal Technologies IncMississauga, CAOn-site$39,740–$41,970 per year
- Manual MachinistccfCleveland Clinic Main CampusOn-site
- Manual MachinistESG EST Group IncPA, USOn-site
Related job searches
Third-party content disclaimer
Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.
LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.
LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.
If you prefer, you may apply directly via the original listing for transparency.