Robotic Welder
Join Henny Penny as an Entry Robotic Welder, where you'll set up and operate a MIG welding robot, ensuring safety and quality in production. This role involves using JDE programming, maintaining a clean workspace, and implementing safety procedures. With a focus on teamwork and innovation, Henny Penny aims to support employees personally and professionally. Located in Eaton, OH, the company is known for its high-quality commercial food equipment, valued by major clients. Ideal candidates should have a high school diploma and 1-3 years of welding experience.
Job description
Do you want to work for a global company that creates remarkable experiences through people, products, and food? If you want to be part of a rewarding People First culture that values relationships, trust, and taking the long view, then this is the place for you. Henny Penny was named the 2021 Dayton Business of the Year for many good reasons. Read on to learn more!
General Description
The Entry Robotic Welder role is responsible for independently setting up equipment fixtures, tooling and running product components to standard.
Accountabilities
- Understands how to correctly use the following functions within JDE programing (i.e. sending Kanban cards, tracking Kanban card status and history.)
- Utilizes and maintains Drawings, Non-Cad Process Sheets and Operating Instructions
- Powers up and prepares the robot cell for production, such as; powering up robot, power supply, turns gasses on
- Changes torch tip and shield nozzle and changes out Shielding gas 12 packs.
- Correctly identifies Wire and Gas types
- Ability to recover from an emergency stop such as; light curtain fault, door key alarm, and inadvertent E stop.
- Uses a variety of hand tools when appropriate to perform various set ups and adjustments.
- Independently sets up and runs 3 different parts
- Demonstrates consistency in practicing all safety procedures.
- Identifies material types and practice proper disposal of scrap.
- Responsible for maintaining a clean work environment.
- Completes all required work within expected time requirements with excellent quality.
- Models Team Member Expected Behaviors and Henny Penny core values
- Other duties as assigned
Qualifications
- High school diploma/GED or equivalent experience
- Must be at least 18 years of age
- 1- 3 years of experience operating and setting up a MIG welding robot. Ability to program is a plus.
- 1- 3 years of experience conducting manual MIG and TIG welding.
- Ability to set up and troubleshoot MIG and TIG welding operations.
- Ability to frequently lift or move objects up to 60 lbs
- Ability to read and interpret technical documents and drawings.
- Effective communication, interpersonal and collaboration skills.
- Ability to problem solve and troubleshoot
- Knowledge of basic math skills (add, subtract, multiply, and divide)
- Ability to understand manufacturing processes such as Kanban, JDE, BOM viewer, method sheets, etc.
- Ability to read, write, and simple instructions, short correspondence and memos
- Basic computer skills
- Must be able to successfully pass pre-employment drug screen, background check screen, and motor vehicle screen (if applicable)
About Us
We’re known in our industry for making the best commercial food equipment in the world. Every day, millions of people eat in restaurants operating Henny Penny equipment. We’re a behind-the-scenes engine in the world’s most demanding kitchens, including long-term partners like McDonald’s, Chick-fil-A, KFC, and Wendy’s. We’re 1,000+ employee-owners who thrive by living a People First mission: to support employees in becoming the best version of themselves both personally and professionally. We recently completed the largest expansion in our history with the addition of 150,000 square feet on our Eaton campus. This expansion drives development of the world’s most reliable, easy-to-use equipment with an innovative new space for global research and development. We have several collaborative spaces for our project teams, a dedicated electrical engineering lab for our hardware and software engineers, a full model shop for rapid prototyping, and a brand-new test lab that has 300 feet of hood space to test new equipment on our product roadmap. On top of that, we have a new state-of-the-art kitchen for our food science group to meet with our customers, understand what they need, and then dial in our equipment to help them make legendary menu items. Henny Penny is an Equal Opportunity Employer. Qualified applicants are considered without regard to race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, physical or mental disability or handicap, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), marital status, veteran or military status, sexual orientation, genetic information, gender identity or expression (including transgender status), or any other characteristic protected by applicable federal, state or local laws.
Responsibilities
Understand how to correctly use the following functions within JDE programing (i.e. sending Kanban cards, tracking Kanban card status and history.); Utilizes and maintains Drawings, Non-Cad Process Sheets and Operating Instructions; Powers up and prepares the robot cell for production, such as; powering up robot, power supply, turns gasses on; Changes torch tip and shield nozzle and changes out Shielding gas 12 packs.; Correctly identifies Wire and Gas types; Ability to recover from an emergency stop such as; light curtain fault, door key alarm, and inadvertent E stop.; Uses a variety of hand tools when appropriate to perform various set ups and adjustments.; Independently sets up and runs 3 different parts; Demonstrates consistency in practicing all safety procedures.; Identifies material types and practice proper disposal of scrap.; Responsible for maintaining a clean work environment.; Completes all required work within expected time requirements with excellent quality.; Models Team Member Expected Behaviors and Henny Penny core values; Other duties as assigned.
Job details
- Published
- October 22, 2026
- Job source
- myworkdayjobs
- Workplace
- On-site · Eaton, US
- First seen
- October 23, 2026
Requirements
High school diploma/GED or equivalent experience; Must be at least 18 years of age; 1- 3 years of experience operating and setting up a MIG welding robot. Ability to program is a plus.; 1- 3 years of experience conducting manual MIG and TIG welding.; Ability to set up and troubleshoot MIG and TIG welding operations.; Ability to frequently lift or move objects up to 60 lbs; Ability to read and interpret technical documents and drawings.; Effective communication, interpersonal and collaboration skills.; Ability to problem solve and troubleshoot; Knowledge of basic math skills (add, subtract, multiply, and divide); Ability to understand manufacturing processes such as Kanban, JDE, BOM viewer, method sheets, etc.; Ability to read, write, and simple instructions, short correspondence and memos; Basic computer skills; Must be able to successfully pass pre-employment drug screen, background check screen, and motor vehicle screen (if applicable).
Skills mentioned in this job
LiftmyCV exclusive data
Henny Penny Corporation hiring intelligence
Henny Penny Corporation currently has 1 active jobs tracked by LiftmyCV. 1 new jobs in the past 7 days.
Active openings
1
Currently tracked by LiftmyCV
New in 7 days
1
1 new jobs in the past 30 days
Published salaries
—
Not published by this employer yet
Average opening age
2 days
Across 1 active opening
Workplace breakdown
Most in-demand roles
- • Parts Fulfillment Specialist
As of November 18, 2026
Hiring insights calculated from active jobs tracked by LiftmyCV.
See how well you match this job
Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.
Sign up to see your matchAlready have an account? Log inMore at Henny Penny Corporation
Similar jobs from this company
- Material Handler - 3rd ShiftHenny Penny CorporationEaton, USOn-site
- Wiring Assembler 3rd ShiftHenny Penny CorporationEaton, OH (Headquarters)On-site
- Wiring Assembler - 3rd ShiftHenny Penny CorporationEaton, USOn-site
- OBS Operator - 3rd ShiftHenny Penny CorporationEaton, USOn-site
- Manufacturing Mechanical Engineer IHenny Penny CorporationEaton, OH (Headquarters)On-site
- Utility Operator - 3rd ShiftHenny Penny CorporationEaton, OH (Headquarters)On-site
Across the market
Similar jobs from other companies
- Robotic WelderWastequip, LLCLouisville, USOn-site
- Robotic WelderValmont Industries Inc.Valley, USOn-site$59,440 per year
- Robotic WelderVenture Products, Inc.Orrville, USOn-site$41,600–$52,000 per year
- Robotic WelderLife Fitness, LLCOwatonna, USOn-site$44,820–$52,730 per year
- Robotic WelderSonoco Products CompanyHartselle, USOn-site$52,000–$52,000 per year
- Robotic WelderAureol Global ConnectionsOwenboy, IEOn-site
Related job searches
Third-party content disclaimer
Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.
LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.
LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.
If you prefer, you may apply directly via the original listing for transparency.