Rotor Technician - 3rd shift
Nidec is looking for a Rotor Technician to operate machinery in department 7. The role requires attention to detail and knowledge of work procedures for producing high-quality parts. Responsibilities include setting up equipment, inspecting parts, and maintaining safety and quality standards. The position demands basic math skills, the ability to read and follow instructions, and strong self-motivation. Candidates should have a minimum of 3 years of experience, with the option of vocational or technical education preferred. This is an on-site position in Mena, Arkansas.
Job description
We begin with dreams. Dreams drive our motivation. Dreams are our future. The world's dreams, people's dreams, our dreams. Our passion creates ideas that make dreams come alive. Technology and products that were only dreams become reality. All for dreams. Dreams challenge and the Nidec-Group will continue to meet the challenge. For the world's and people's tomorrows; the world's first, the world's best technologies and products; we will continue our part in creating a better society.
Job Summary
Must be able to set up and operate the machinery in department 7 in an efficient manner. This position requires extreme attention to details and a thorough knowledge of the work procedures and component applications. Employee will be responsible for producing high quality parts for the next internal customer in the chain. Job Description
PRIMARY DUTIES AND RESPONSIBILITIES:
- Ability to set up and operate the machinery in department 7 such as die cast, small rotor final, spin cast, fab rotor, etc…
- Ability to visually inspect parts and detect defects and make necessary changes with quality guidelines
- Read a tape measurer
- Must comply with company quality and safety guidelines
- Maintain a clean and orderly work area
- Perform other duties as assigned
COMPETENCIES/TECHNICAL/FUNCTIONAL SKILLS & KNOWLEDGE:
Minimum
- Basic Math Skills
- Ability to read and follow instructions
- Strong attention to detail
- Self motivated
- Ability to multi-task
Preferred
- Ability to work independently
- Dependability
- Must be able to read prints
- Use micrometers, verniers, snap gauges
- Basic computer skills
- Operate a fork lift
Additional Job Details
Support & Production – S2 Organizational Impact • Works to deliver on day-to-day objectives with moderate impact on achievement of results for the team
- Work consists of tasks that are typically routine, with some deviation from standard practice
- Works under moderate supervision for routine tasks
- May seek advice of more senior employees in the same team
Communication & Influence
- Communicates with contacts typically within the team on matters that involve obtaining or providing information requiring some explanation or interpretation in order to reach agreement
Innovation & Complexity
- Checks and makes minor adjustments to work methods to solve problems that are routine and typically exist in current work processes and systems
- May be required to highlight areas of concerns/problems to supervisor in own team
- Daily challenges are generally routine, but may require interpretation of procedures or policies to resolve problems
Leadership & Talent Management
- May provide guidance or assistance to new or entry-level employees
Knowledge & Experience
- Requires basic job knowledge of systems and procedures obtained through prior work experience or education
- Requires a minimum of 3 years of experience. May require vocational or technical education
Equal Employment Opportunity and Affirmative Action at Nidec
Nidec is an Equal Employment Opportunity (EEO) and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants receive consideration for employment without regard to their age, gender, gender identity, sexual orientation, race, color, genetic information, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by law. For more information regarding your (EEO) rights as an applicant, please visit the following website:
Work Shift Schedule
Third Shift (United States of America)
No Soliciting
Nidec will not accept unsolicited resumes from individual recruiters or third party recruiting agencies in response to Nidec job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. Pre-approval from the Nidec Talent Acquisition team is required before any external candidate can be submitted and such candidate must be submitted to the Nidec Talent Acquisition team.
Job details
- Published
- October 15, 2026
- Job source
- myworkdayjobs
- Workplace
- On-site · Mena, US
- First seen
- October 16, 2026
Requirements
Basic Math Skills. Ability to read and follow instructions. Strong attention to detail. Self motivated. Ability to multi-task. Preferred: Ability to work independently. Dependability. Must be able to read prints. Use micrometers, verniers, snap gauges. Basic computer skills. Operate a fork lift.
LiftmyCV exclusive data
Nidec Motor Corporation hiring intelligence
Nidec Motor Corporation currently has 9 active jobs tracked by LiftmyCV. 8 new jobs in the past 7 days.
Active openings
9
Currently tracked by LiftmyCV
New in 7 days
8
9 new jobs in the past 30 days
Published salaries
—
Not published by this employer yet
Average opening age
2 days
Across 9 active openings
Workplace breakdown
Hiring countries
Top hiring cities
Most in-demand roles
- • Field Service Engineer MV Drives
- • Lamination Technician - 3rd shift
- • Machine operator
- • Materials Handler III
- • Production Scheduling Supervisor
- • Rotor Technician - 3rd shift
Frequently requested skills
As of November 18, 2026
Hiring insights calculated from active jobs tracked by LiftmyCV.
See how well you match this job
Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.
Sign up to see your matchAlready have an account? Log inMore at Nidec Motor Corporation
Similar jobs from this company
- Senior BESS Service TechnicianNidec Motor CorporationBrooklyn Heights, USOn-site
- Production Supervisor - 2nd ShiftNidec Motor CorporationLexington, USOn-site
- Senior BESS Service Technician 1Nidec Motor CorporationBrooklyn Heights, USOn-site
- Material Handler- 1st ShiftNidec Motor CorporationLexington, USOn-site
- Winding Tech I- 3rd ShiftNidec Motor CorporationMena, USOn-site
- Winding Technician II - 3rd shiftNidec Motor CorporationMena, USOn-site
Across the market
Similar jobs from other companies
- Rotor Technician - 1st shiftNidec Motor CorporationMena, USOn-site
- Rotor TechnicianNidec Motor CorporationMena, USOn-site
- Rotor MechanicBaker Hughes Energy Services LLCTX, USOn-site
- Rotor Winder Hookup - First ShiftKato Engineering, Inc.Mankato, USOn-site$51,151–$59,311 per year
- Rotor Winder Hookup - Second ShiftKato Engineering, Inc.North America/United States/Minnesota/Mankato, MNOn-site
- Assembler Rotors & Stators Lead - Weekend ShiftGenerac Power Systems IncBeaver Dam, WI - United StatesOn-site
Third-party content disclaimer
Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.
LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.
LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.
If you prefer, you may apply directly via the original listing for transparency.