
Senior Electrical Engineer, Robot Controller Hardware
Dexmate is seeking a Senior Electrical Engineer to design controller hardware for their robot platforms, involving multicore architectures integration and hands-on board design. Candidates should have at least 5 years of experience in electrical hardware design, particularly with embedded systems and high-speed digital electronics. Responsibilities include defining hardware requirements, schematic design, and leading board bring-up along with validation processes. The position emphasizes collaboration with cross-functional teams to convert robot requirements into reliable hardware solutions.
Job description
About Dexmate
Dexmate is building robot platforms and a universal Physical AI OS to make robots easier to build and deploy. We combine hardware and software into a plug-and-play platform for developers, researchers and enterprises, with an open ecosystem that supports the development of physical AI.
The Role
We are looking for a Senior Electrical Engineer to design the onboard controller hardware for Dexmate’s robot platforms. You will own multi-processor architectures integrating NVIDIA Jetson modules, x86 hosts, and supporting MCUs, along with the sensor interfaces, networking, synchronization, and power systems that connect them. This is a hands-on board design role spanning architecture, schematics, PCB development, bring-up, validation, and production release. You will work closely with software, systems, mechanical, thermal, and manufacturing engineers to turn robot requirements into reliable controller hardware.
Responsibilities
- Define controller hardware requirements with software and systems teams, including processing needs, sensor connectivity, interface bandwidth, synchronization, power budgets, and environmental constraints.
- Architect multi-processor controller platforms integrating Jetson modules, x86 hosts, and MCUs. Define processing boundaries, inter-processor communication, peripheral connections, and dependencies across power, clock, reset, and boot domains.
- Design custom carrier boards for NVIDIA Jetson modules, including AGX Thor, following platform design requirements and validating implementation on physical hardware.
- Evaluate compute platform options, including NVIDIA Jetson, Qualcomm robotics platforms, and x86 processors, against robot performance, power, thermal, packaging, and lifecycle requirements.
- Own schematic design, component selection, and PCB development for controller motherboards, carrier boards, and associated interface electronics. Execute layout or provide detailed technical direction and review.
- Design and validate high-speed interfaces such as PCIe, multi-gigabit Ethernet, USB, MIPI CSI-2, and camera SerDes links. Define stackups, impedance targets, routing constraints, grounding, and return paths.
- Design onboard networking and hardware time synchronization between processors, cameras, and sensors, working with software engineers to verify system behavior.
- Develop board-level power architectures, including DC-DC conversion, sequencing, transient response, protection, monitoring, and fault reporting.
- Analyze signal and power integrity risks, correlate assumptions with bench measurements, and resolve interface instability and power-related failures.
- Lead board bring-up with embedded software engineers, debugging boot, reset, clocking, processor communication, peripheral enumeration, and sensor connectivity.
- Define and execute validation plans covering interface performance, sustained workloads, power cycling, temperature, supply variation, and fault recovery.
- Partner with mechanical and thermal engineers on connectors, cables, cooling, and packaging; support EMI/EMC testing and corrective actions.
- Work with manufacturing and test teams on DFM/DFT reviews, prototype builds, production test coverage, component substitutions, and production release.
Minimum Qualifications
- 5+ years of electrical hardware design experience with embedded processor systems, high-speed digital electronics, or similarly complex products, including at least one board taken through bring-up and production release.
- Hands-on design of at least one custom NVIDIA Jetson carrier board, taken through board bring-up.
- Demonstrated ownership of processor-based motherboards, system-on-module carrier boards, or comparable complex multilayer PCBAs, from schematic design through validation.
- Experience designing hardware interfaces between processors, compute modules, MCUs, and peripherals, including power, reset, clocking, and boot dependencies.
- Strong schematic design skills and proficiency with Altium, Cadence, or equivalent tools, with experience defining and reviewing high-speed PCB layouts.
- Practical experience designing and debugging multiple high-speed interfaces, such as PCIe, Ethernet, USB, MIPI, or camera SerDes.
- Strong understanding of signal and power integrity, including transmission lines, impedance discontinuities, return paths, decoupling, and power distribution networks.
- Experience designing processor or compute-module power supplies, including regulator selection, load transients, sequencing, and protection.
- Strong bench debugging skills using oscilloscopes, appropriate probing techniques, logic or protocol analyzers, and programmable power supplies.
- Experience working with embedded software engineers to diagnose hardware/software interface issues and verify fixes on physical hardware.
Preferred Qualifications
- Experience with NVIDIA Jetson AGX Thor or AGX Orin, including carrier-board implementation, platform bring-up, and power and thermal integration.
- Experience integrating multiple processor families within one controller platform, such as ARM with x86, or application processors with real-time MCUs.
- Experience with Qualcomm robotics platforms or chip-down designs using Qualcomm SoCs, PMICs, and LPDDR.
- Experience designing controller hardware for robots, autonomous vehicles, drones, or other systems constrained by power, space, and operating environment.
- Experience with discrete processor and DDR memory integration, including layout constraints and timing validation.
- Experience integrating multiple cameras and sensors over GMSL, FPD-Link, or multi-gigabit Ethernet.
- Experience implementing hardware time synchronization using IEEE 1588/PTP or gPTP.
- Experience with HDI PCB design, dense BGA fanout, and signal or power integrity simulation using tools such as HyperLynx, Sigrity, or Ansys.
- Familiarity with embedded Linux, JetPack, pinmux and device tree configuration, boot diagnostics, and scripting for hardware validation.
- Experience with EMC pre-compliance testing, environmental qualification, production test development, and manufacturing ramp.
Job details
- Published
- November 7, 2026
- Last checked
- November 18, 2026
- Experience
- Senior
- Job source
- ashby
- First seen
- November 7, 2026
Skills mentioned in this job
LiftmyCV exclusive data
Dexmate hiring intelligence
Dexmate currently has 10 active jobs tracked by LiftmyCV. 1 new jobs in the past 7 days.
Verified November 18, 2026
Active openings
10
Currently tracked by LiftmyCV
New in 7 days
1
10 new jobs in the past 30 days
Published salaries
—
Not published by this employer yet
Average opening age
14 days
Across 10 active openings
Workplace breakdown
Hiring countries
Top hiring cities
Most in-demand roles
- • CNC Machinist
- • Embedded Motor Controls Engineer
- • Embedded Systems Engineer, Robotics
- • Marketing Campaign and Event Manager
- • Mechanical Design Engineer for Actuator Integration
- • Motor Drive and Power Electronics Engineer
Frequently requested skills
As of November 18, 2026
Hiring insights calculated from active jobs tracked by LiftmyCV.
See how well you match this job
Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.
Sign up to see your matchAlready have an account? Log inMore at Dexmate
Similar jobs from this company
- CNC MachinistDexmateFremont, US
- Senior Manufacturing Engineer, RoboticsDexmateFremont Office
- Embedded Motor Controls EngineerDexmateFremont Office
- Thermal Engineer for Actuator CoolingDexmateFremont Office
- Motor Drive and Power Electronics EngineerDexmateFremont Office
- Marketing Campaign and Event ManagerDexmateFremont, US
Across the market
Similar jobs from other companies
- 2.13 Robotics Hardware Engineer – Electrical Systemsfield-aiIrvine, CAOn-site
- Robot Electric Control Software EngineerJointelligence (Shenzhen) Technology LimitedShenzhen, CNOn-site
- Controls Engineer II – Hardware/ElectricalDaikin Applied Americas IncPlymouth, MN 55441On-site
- Senior Electrical Engineer Hardware and ControlsglobalhrTX, USHybrid
- Robotics Hardware InternLaplacian RoboticsSeongnam, KROn-site
- Robotics Hardware SpecialistASUS Robotics & AI CenterTaipei, TWOn-site
Related job searches
Third-party content disclaimer
Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.
LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.
LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.
If you prefer, you may apply directly via the original listing for transparency.