Senior Hardware Test Engineer - Components
Job description
Apptronik is a human-centered robotics company developing AI-powered robots to support humanity in every facet of life. Our flagship humanoid robot, Apollo, is built to collaborate thoughtfully with people, starting with critical industries such as manufacturing and logistics, with future applications in healthcare, the home, and beyond. We operate at the cutting edge of Applied AI, applying our expertise across the full robotics stack to solve some of society's most important problems. You will join a team dedicated to bringing Apollo to market at scale, tackling the complex challenges like safety, commercialization, and mass production to change the world for the better.
JOB SUMMARY
We are seeking a Senior Hardware Test Engineer to own design validation, reliability, and production test for the electronic components behind Apptronik's robots: PCBAs, wiring harnesses, sensors, and compute modules. You will design and run test campaigns including HALT/HASS, define test methods and fixture requirements (ICT, flying probe, functional test) and work with fixture designers to get them built, and root-cause failures down to the board, connector, or component level. You will work closely with design, firmware, and manufacturing teams, and hand off validated test processes to the Manufacturing Test team as programs scale into production.
ESSENTIAL DUTIES AND RESPONSIBILITIES or KEY ACCOUNTABILITIES
- Component Validation Testing: Plan and execute test campaigns to validate PCBAs, wiring harnesses, sensors, and compute modules against specs across electrical, thermal, and environmental conditions.
- HALT/HASS & Harness Reliability: Design and run HALT to find design margins and failure modes, develop HASS screens for production, and define harness tests that capture field-failure drivers such as continuity, insulation and contact resistance, connector retention, and flex and strain relief.
- Sensor & Compute Characterization: Apply an understanding of each sensor modality's physics (e.g., IMU, encoder, force/torque, camera, thermal) to characterize accuracy, noise, drift, and environmental sensitivity, and stress key compute parameters (clocks, voltage rails, thermals, memory and I/O load) to find performance limits.
- Test Automation, Fixtures & Root-Cause Analysis: Build fixtures and test automation, and diagnose failures down to the board, connector, or component level with actionable feedback to design.
- Production Test Handoff: Develop test methods with defined pass/fail criteria and operator documentation, then transfer them to the Manufacturing Test team to support incoming inspection and production testing.
SKILLS AND REQUIREMENTS
- Hands-on experience validating electronic hardware (PCBAs, wiring harnesses, sensors, or compute modules) using bench equipment such as oscilloscopes, power supplies, and DAQ systems.
- Experience with production test methods such as in-circuit test (ICT), flying probe, and functional test, including designing fixtures (e.g., bed-of-nails) and defining pass/fail criteria and handoff documentation.
- Experience with HALT/HASS, including defining stress profiles and interpreting failure modes, plus knowledge of what drives harness field failures (contact resistance, connector retention, flex fatigue).
- Strong debugging skills to root-cause failures to the board, connector, or component level using schematics, harness drawings, and datasheets.
- Understanding of sensor physics (e.g., IMU, encoder, force/torque, camera, thermal) sufficient to characterize accuracy, noise, drift, and environmental sensitivity.
- Preferred: Experience stressing compute platforms (clocks, voltage rails, thermals, memory and I/O load) to find performance limits and failure modes.
- Preferred: Experience with robotics, humanoid, or other electromechanical systems, including actuator or motor-driven hardware.
- Preferred: Experience transitioning test methods from R&D into production or manufacturing environments, including NPI.
- Preferred: Test automation experience (e.g., Python, LabVIEW, or similar) for data acquisition, analysis, and automated test sequencing.
- Preferred: Familiarity with DFT (design for test) and DFM practices, including working with design engineers to add test points and improve testability.
EDUCATION and/or EXPERIENCE
- BS in Electrical Engineering, Mechanical Engineering, Robotics, or a related field + 6 years of relevant experience, OR MS in a related field + 4 years, OR PhD in a related field + 2 years.
PHYSICAL REQUIREMENTS
- Prolonged periods of sitting at a desk and working on a computer
- Must be able to lift 15 pounds at times
- Vision to read printed materials and a computer screen
- Hearing and speech to communicate
*This is a direct hire. Please, no outside Agency solicitations. Apptronik provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
Job details
- Published
- October 29, 2026
- Last checked
- November 17, 2026
- Experience
- Senior
- Job source
- greenhouse
- Workplace
- On-site · Austin, US
- First seen
- October 30, 2026
LiftmyCV exclusive data
Apptronik hiring intelligence
Apptronik currently has 28 active jobs tracked by LiftmyCV. 2 new jobs in the past 7 days.
Verified November 17, 2026
Active openings
28
Currently tracked by LiftmyCV
New in 7 days
2
24 new jobs in the past 30 days
Published salaries
14%
Median disclosed salary: $250,000
Average opening age
32 days
Across 28 active openings
Workplace breakdown
Hiring countries
Top hiring cities
Most in-demand roles
- • Director of Enterprise Security
- • Engineering Manager - Controls
- • Manager, Talent Acquisition Operations
- • Manager, Test Operations
- • Mechanical Engineer - Actuation
- • R&D Technician
Frequently requested skills
Median disclosed salary: $250,000 · 14% of jobs publish a salary
As of November 17, 2026
Hiring insights calculated from active jobs tracked by LiftmyCV.
See how well you match this job
Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.
Sign up to see your matchAlready have an account? Log inMore at Apptronik
Similar jobs from this company
Across the market
Similar jobs from other companies
- Hardware Component EngineerHitachi Rail RomaniaBucharest, ROOn-site
- Hardware Component EngineerphilipsPlymouth, USOn-site
- Component Test EngineerpaeCrane, USOn-site$65,000–$85,000 per year
- Hardware Component Engineer - ElectricalSilvus Technologies, Inc.Los Angeles, USOn-site
- Additive Component Hardware OwnerGE Avio S.r.l.BrindisiOn-site
- Senior Hardware Components Engineer (Onsite)globalhrUnited States-FL-LARGO-382SS ~ 7887 Bryan Dairy Rd. ~ BLDG 100On-site
Related job searches
Third-party content disclaimer
Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.
LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.
LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.
If you prefer, you may apply directly via the original listing for transparency.