LiftmyCVLiftmyCV

Software System Test Engineer - Virtualization & Battery Systems

General Motors LLCOn-siteMilford, US

Job description

Job Description

Work Classification:

Hybrid: The successful candidate is expected to report to Milford, MI three times per week, at minimum, or as dictated by the business.

The Role:

The Battery Systems Controls organization is responsible for developing and validating next-generation battery management systems that deliver safe, reliable, and efficient operation across GM’s vehicle portfolio. The Battery Systems E2E System Testing team is establishing requirements-based system testing across CoSIM, Software-in-the-Loop (SIL), Hardware-in-the-Loop (HIL), and physical battery test environments. As a Battery Systems System Test Engineer focused on CoSIM/SIL/Virtualization, you will drive early, repeatable, and automated system-level validation of battery-management and embedded-control software in virtual environments. You will translate system requirements and Behavior Technical Specifications into logical test cases, instantiate tests in CoSIM/SIL, assess virtual-environment readiness, and partner with System Engineering, Software, Calibration, Simulation, Systems Integration, Functional Safety, and HIL and physical battery test teams to identify issues before they reach physical benches, vehicles, or program milestones. This role is an opportunity to help build a virtual-first system-test capability for one of the most important and technically complex vehicle systems. You will improve model fidelity, test coverage, regression health, and automation while helping create a common system-test suite that can be reused across CoSIM, HIL, and physical battery test environments.

What You’ll Do:

  • Define logical system and system-in-context test cases from system requirements, Behavior Technical Specifications, System Technical Specifications, and program verification objectives.
  • Serve as the primary owner for implementing and maintaining feasible system-function and system-in-context tests in CoSIM/SIL.
  • Create test scenarios covering nominal operation, variant behavior, calibration-dependent behavior, degraded states, fault handling, boundary conditions, and robustness use cases.
  • Evaluate the readiness and capability of virtual environments, including vECUs, plant models, software content, interfaces, calibrations, overrides, configurations, and required signal pathways.
  • Partner with Simulation Tools and Infrastructure, SIL/CoSIM integration, and model-development teams to define needs for new or improved virtual-test capability.
  • Support integration of battery-control software, vECUs, plant models, sensor and actuator models, and program-specific configurations into virtual test packages.
  • Develop and maintain automated test scripts, step definitions, scenario data, test configurations, and reusable test assets in the common test framework.
  • Integrate CoSIM/SIL tests into CI/CD regression pipelines and help establish predictable nightly or per-build execution where technically feasible.
  • Analyze test results, logs, waveforms, diagnostics, and trends; identify failures and distinguish product defects from model, configuration, infrastructure, calibration, or test-asset issues.
  • Work with System Owners, Product System Engineers, Sub-System Lead Engineers, Software Engineers, SQAE/SIA, and Calibration Engineers to reproduce issues, support root-cause analysis, and route defects to the appropriate owners.
  • Maintain traceability among system requirements, test cases, automation, execution results, defects, and program or TFRP evidence.
  • Collaborate with HIL and Battery Systems Lab System Test Engineers to identify which virtual tests require equivalent physical-environment instantiations and to keep test identifiers and pass/fail criteria aligned.
  • Support correlation and continuous improvement of virtual models by using results from CoSIM/SIL, HIL, battery benches, and other test environments.
  • Develop test-result metrics and dashboards that communicate coverage, pass rate, flakiness, regression health, trends, and environment gaps.
  • Prepare test evidence, status, risks, demonstrations, and technical summaries for engineering reviews and program milestones.
  • Create and maintain standard work, test procedures, how-to guides, and documentation for CoSIM/SIL usage, test execution, troubleshooting, and automation.
  • Identify opportunities to improve testing efficiency, coverage, repeatability, model fidelity, and automation through continuous improvement and innovative test methods.
  • Share status, risks, roadblocks, lessons learned, and technical decisions with team members, technical leads, and cross-functional stakeholders.
  • Provide technical guidance and mentorship to engineers who are developing or using virtual system-test environments.

Your Skills & Abilities (Required Qualifications):

  • Bachelor of Science degree in Electrical Engineering, Computer Engineering, Systems Engineering, Mechanical Engineering, Computer Science, Physics, Mathematics, or a related technical field.
  • 2+ years of engineering experience related to software testing, system integration, verification and validation, embedded controls, simulation, battery systems, or vehicle systems.
  • Experience developing or executing system-level tests for embedded software, control systems, battery systems, or other complex hardware/software products.
  • Working knowledge of battery systems, battery-management systems, and related embedded-control systems.
  • Experience decomposing requirements into system functions, logical test cases, expected behavior, pass/fail criteria, and test evidence.
  • Experience with computer-based simulation, Software-in-the-Loop, CoSIM, virtual ECUs, plant models, or equivalent virtual test environments.
  • Basic to intermediate programming or scripting experience using Python, MATLAB/Simulink, C, C++, or comparable languages.
  • Ability to analyze test data, logs, waveforms, software behavior, and diagnostic information to identify and communicate issues.
  • Understanding of automotive communication and diagnostics, including CAN, LIN, Ethernet, UDS, or equivalent technologies.
  • Strong written and oral communication skills, including the ability to document technical work clearly and communicate risks to diverse stakeholders.
  • Demonstrated ability to learn new tools and processes quickly, manage multiple priorities, work independently, and follow through on commitments.

What Can Give You a Competitive Edge (Preferred Qualifications):

  • Master’s degree or additional coursework in Electrical Engineering, Computer Engineering, Systems Engineering, Controls, Computer Science, Automotive Engineering, or a related discipline.
  • 5+ years of experience in system testing, software verification and validation, simulation, test automation, embedded controls, battery systems, or vehicle development.
  • Direct experience testing battery-management system functions such as energy management, charging, diagnostics, contactor control, isolation monitoring, protection, thermal behavior, state estimation, fault handling, or power limitation.
  • Hands-on experience with CoSIM, SIL, HIL, CHIL, virtual ECU testing, battery cyclers, battery-pack benches, or equivalent simulation and laboratory platforms.
  • Experience integrating virtual test environments, including plant models, vECUs, communication interfaces, sensor/actuator models, overrides, calibrations, and program-specific configurations.
  • Familiarity with co-simulation and model-exchange concepts such as FMI, functional mock-up units, Protobuf, or equivalent interface technologies.
  • Experience developing model-based tests or working with physics-based, electrical, thermal, electrochemical, or behavioral models.
  • Experience with automated testing and CI/CD tools such as Git, Jenkins, GitLab, Azure DevOps, or similar platforms.
  • Experience creating reusable test frameworks, step definitions, scenario libraries, test-data tools, or automated result-analysis workflows.
  • Experience correlating results across virtual environments, HIL, battery-pack benches, and vehicle testing.
  • Familiarity with requirements, test-management, and defect-tracking tools such as Jira, DNG, JAMA, ETM, or equivalent platforms.
  • Knowledge of automotive development and assurance processes, including ISO 26262 functional safety, ASPICE, cybersecurity, or requirements-based verification.
  • Experience working with global engineering teams, suppliers, simulation-tool providers, or technology partners.





This role is categorized as hybrid. This means the selected candidate is expected to report to a specific location at least 3 times a week {or other frequency dictated by their manager}.

This job is not eligible for relocation benefits. Any relocation costs would be the responsibility of the selected candidate.



About GM

Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all.

Why Join Us

We believe we all must make a choice every day – individually and collectively – to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team.

Benefits Overview

From day one, we're looking out for your well-being–at work and at home–so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire.

Accommodations

General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us or call us at 1-. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Job details

Published
November 16, 2026
Job source
myworkdayjobs
Workplace
On-site · Milford, US
First seen
November 16, 2026

LiftmyCV exclusive data

General Motors LLC hiring intelligence

General Motors LLC currently has 18 active jobs tracked by LiftmyCV. 16 new jobs in the past 7 days.

Active openings

18

Currently tracked by LiftmyCV

New in 7 days

16

18 new jobs in the past 30 days

Published salaries

11%

Median disclosed salary: $226,950

Average opening age

3 days

Across 18 active openings

Workplace breakdown

Remote6%
Hybrid0%
On-site94%

Hiring countries

United States of America

Top hiring cities

Warren
Detroit
Milford
Sunnyvale
Austin
Buffalo
Hamtramck

Most in-demand roles

  • • 2027 Manufacturing Intern - University of Buffalo
  • • 2027 Summer Finance Treasury MBA Intern
  • • Assistant Technical Program Manager, BCDC (Battery Cell Development Center)
  • • Data Analytics Engineer - TRP
  • • Electrical Journeyperson - Tonawanda Propulsion
  • • Plant Supplier Quality Engineer

Frequently requested skills

AWS
Azure
Docker
GCP
Go
Java
Kubernetes
Python

Median disclosed salary: $226,950 · 11% of jobs publish a salary

As of November 18, 2026

GENERAL MOTORS LLC · ACTIVE

SEC CIK 0001467858

Hiring insights calculated from active jobs tracked by LiftmyCV.

Company information from GLEIF, SEC EDGAR.

AI match explained

See how well you match this job

Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.

Sign up to see your matchAlready have an account? Log in

Visa sponsorship insights

Sponsorship not specified for this role

This job posting does not state whether visa sponsorship is available.

Employer H-1B filing history

General Motors

603

certified

FY 2026

latest data

Based on U.S. Department of Labor LCA disclosure data. LCA certification is not the same as visa petition approval, and historical activity does not guarantee sponsorship for this role.

U.S. Department of Labor disclosure data

More at General Motors LLC

Similar jobs from this company

Across the market

Similar jobs from other companies

Related job searches

Third-party content disclaimer

Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.

LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.

LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.

If you prefer, you may apply directly via the original listing for transparency.