
Solder Technician
As a Solder Technician at Rocket EMS, you'll be responsible for hand-soldering through-hole and surface-mount components on printed circuit board assemblies. Your tasks will include inspecting solder joints, performing touch-ups and approved rework, and documenting repairs for traceability. Candidates should have hands-on soldering experience and familiarity with IPC workmanship requirements. This role is crucial for ensuring high-quality production on the manufacturing floor.
Job description
As a Solder Technician, you’ll hand-solder through-hole and surface-mount components on printed circuit board assemblies (PCBAs). You’ll perform solder touch-up and approved rework, inspect your work under magnification, and document repairs so each assembly can be traced through production.
What you’ll do
- Hand-solder components, connectors, and wires using the solder alloy, flux, and tools specified in the work instructions.
- Perform solder touch-up and component removal and replacement using temperature-controlled soldering irons, desoldering tools, and hot-air stations.
- Read assembly drawings, work instructions, and job travelers. Verify component identity, placement, orientation, and polarity before soldering.
- Inspect solder joints and surrounding areas for bridging, insufficient solder, poor wetting, lifted pads, and other damage. Follow applicable IPC J-STD-001 workmanship requirements and IPC-A-610 acceptance criteria.
- Record completed work and rework by work order or serial number. Escalate defects to the production lead or Quality and route assemblies for required inspection.
- Follow electrostatic discharge (ESD), fume extraction, and personal protective equipment procedures. Keep leaded and lead-free materials and tools separate as required.
Required qualifications
- Hands-on experience soldering electronic components and the ability to produce consistent solder joints.
- Ability to read assembly drawings and written instructions and identify common electronic components.
- Ability to position small components accurately and inspect fine details under a microscope.
- Basic computer skills to record production and rework activity.
Preferred qualifications
- PCB assembly or electronics manufacturing experience, especially fine-pitch surface-mount soldering or component-level rework.
- Experience with both leaded and lead-free soldering processes.
- Training or certification in IPC J-STD-001, IPC-A-610, or IPC-7711/7721.
Rocket EMS is seeking an experienced Manufacturing Floor Facilities Technician to support the condition, maintenance, and readiness of our production floor during the graveyard shift. This is a hands-on position focused specifically on maintaining the manufacturing floor and production environment. The technician will perform floor maintenance, cleaning, repair, and preventative work while production activity is reduced, helping ensure the manufacturing area is clean, safe, professional, and ready for operations each morning. This is not a janitorial position. We are looking for someone with experience maintaining flooring in an industrial or manufacturing environment who understands the equipment, chemicals, processes, and safety requirements associated with maintaining high-traffic production floors.
Responsibilities
- Maintain manufacturing floors throughout production, warehouse, aisle, and other designated operational areas.
- Operate industrial floor-maintenance equipment, including floor scrubbers, buffers/burnishers, polishers, and related equipment.
- Perform routine and deep cleaning of manufacturing floors during overnight hours.
- Strip, wax, seal, polish, or refinish flooring as appropriate for the floor type and facility requirements.
- Remove scuffs, residue, adhesive, grease, oil, and other manufacturing-related buildup without damaging floor surfaces.
- Perform minor floor repairs and address damaged or deteriorating areas as appropriate.
- Maintain designated aisles, walkways, production boundaries, and other marked floor areas.
- Support floor marking and application/removal of safety tape, aisle markings, equipment boundaries, and other visual controls.
- Move or coordinate movement of floor-accessible items when necessary to complete scheduled maintenance.
- Inspect flooring for cracks, trip hazards, damage, spills, or other safety concerns and report or correct issues promptly.
- Use cleaning chemicals and floor-care products safely and according to manufacturer and facility requirements.
- Maintain floor equipment, including routine cleaning, inspection, charging, and basic preventative maintenance.
- Coordinate work around manufacturing schedules and equipment to minimize disruption to production.
- Follow ESD, safety, PPE, chemical-handling, and manufacturing-floor requirements.
- Communicate completed work and any outstanding floor or safety issues to Facilities management.
Qualifications
- Previous industrial or manufacturing floor-care experience required.
- Experience operating commercial/industrial auto scrubbers, buffers, burnishers, floor polishers, and similar equipment.
- Knowledge of industrial floor-cleaning chemicals, coatings, finishes, and proper application methods.
- Experience maintaining floors in a manufacturing, electronics, semiconductor, clean manufacturing, warehouse, or industrial environment strongly preferred.
- Understanding of floor safety, slip prevention, chemical handling, and proper PPE.
- Ability to work independently and manage an overnight floor-maintenance schedule.
- Strong attention to detail and ability to recognize floor damage and safety hazards.
- Reliable attendance and ability to consistently work 8:00 PM–4:30 AM.
Preferred Experience
Experience with ESD-sensitive manufacturing environments and ESD flooring would be a big plus for Rocket. Experience maintaining epoxy, sealed concrete, resinous, or other industrial flooring is also highly desirable. Pay Range $25—$30 USD ITAR/EAR Compliance: Due to the nature of the work performed at Rocket EMS, this position may require access to export-controlled technical data or technology. The successful candidate must be eligible to access such information under applicable U.S. export-control laws or be eligible for any required government authorization. Rocket EMS will consider qualified applicants with criminal histories in a manner consistent with the California Fair Chance Act. Candidates are not required to disclose criminal history or participate in a background check unless and until a conditional offer of employment has been made. Any final offer of employment may be conditioned on completion of a background check, consistent with applicable law. #zr
Job details
- Published
- November 12, 2026
- Last checked
- November 16, 2026
- Job source
- greenhouse
- Workplace
- On-site · San Jose, US
- First seen
- November 13, 2026
Skills mentioned in this job
LiftmyCV exclusive data
Rocket EMS hiring intelligence
Rocket EMS currently has 51 active jobs tracked by LiftmyCV. 31 new jobs in the past 7 days.
Verified November 16, 2026
Active openings
51
Currently tracked by LiftmyCV
New in 7 days
31
51 new jobs in the past 30 days
Published salaries
24%
Median disclosed salary: $46,800
Average opening age
7 days
Across 51 active openings
Workplace breakdown
Hiring countries
Top hiring cities
Most in-demand roles
- • 2D X-Ray Operator (Second Shift)
- • AOI/AXI Operator
- • AOI/AXI Operator (Second Shift)
- • Assembler
- • Buyer
- • Conformal Coating Lead
Frequently requested skills
Median disclosed salary: $46,800 · 24% of jobs publish a salary
As of November 17, 2026
Hiring insights calculated from active jobs tracked by LiftmyCV.
See how well you match this job
Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.
Sign up to see your matchAlready have an account? Log inVisa sponsorship insights
Sponsorship not specified for this role
This job posting does not state whether visa sponsorship is available.
Employer H-1B filing history
Rocket EMS, Inc.
4
certified
FY 2026
latest data
Based on U.S. Department of Labor LCA disclosure data. LCA certification is not the same as visa petition approval, and historical activity does not guarantee sponsorship for this role.
More at Rocket EMS
Similar jobs from this company
- Rework TechnicianRocket EMSCarson City, USOn-site
- Rework Technician (Second Shift)Rocket EMSCarson City, USOn-site
- Facilities TechnicianRocket EMSCarson City, USOn-site$41,600–$52,000 per year
- Tooling Coordinator TechnicianRocket EMSSan Jose, USOn-site
- Facilities Technician (Second Shift)Rocket EMSSan Jose, USOn-site
- Process TechnicianRocket EMSCarson City, USOn-site
Across the market
Similar jobs from other companies
Related job searches
Third-party content disclaimer
Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.
LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.
LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.
If you prefer, you may apply directly via the original listing for transparency.