Structural Welder
The Structural Welder role at Ponca City Development Authority involves welding structural steel components and assemblies following specified requirements for weld quality and safety. The position requires attention to detail, the ability to interpret shop drawings, and a commitment to maintaining equipment and work environments. Previous experience in structural steel welding is preferred, along with a proficient understanding of welding procedures, joint preparation, and inspection processes. Benefits include potential relocation assistance and insurance coverage after the probationary period.
Job description
This position is being hired by MJ&H, and the contact for questions will be Bryan Sharp:
[email protected] . POSITION SUMMARY Responsible for welding structural steel components and fabricated assemblies in accordance with shop drawings, weld symbols, applicable Welding Procedure Specifications (WPS), and job requirements. This position focuses on productive structural welding while maintaining dimensional integrity, weld quality, and safe shop practices. Relocation assistance available if moving from out of the area up to $4500 PRIMARY RESPONSIBILITIES
- Weld structural steel assemblies including beams, columns, frames, plates, stiffeners, clips, connections, and other fabricated components.
- Perform fillet, groove, and other required welds using the welding processes and positions applicable to assigned work.
- Read and interpret shop drawings, weld symbols, dimensions, and connection details before welding.
- Verify that fitted assemblies, joint preparation, weld size, and component placement appear correct before beginning work.
- Follow applicable WPS requirements including process, consumable, technique, and other specified variables.
- Use proper welding sequence and heat control to reduce distortion, pulling, and movement of structural assemblies.
- Clean weld areas and remove slag, spatter, or other material as required between passes and after welding.
- Recognize visible weld discontinuities, poor fit-up, drawing discrepancies, or other problems and address or report them promptly.
- Perform minor preparation, grinding, gouging, or weld repair when authorized and required.
- Maintain welding equipment, leads, guns, tools, and work areas in serviceable condition.
- Meet reasonable production expectations without sacrificing weld quality or safety.
EXPERIENCE & QUALIFICATIONS
- Previous structural steel welding experience preferred.
- Ability to pass the applicable M J & H Fabrication structural weld test(s).
- Ability to read structural shop drawings and understand common weld symbols.
- Working knowledge of structural welding practices, joint preparation, weld sizes, and common fabrication terminology.
- Experience with the welding processes used in structural fabrication is preferred.
- Ability to use tape measures, squares, gauges, and common shop measuring tools.
SKILLS & ABILITIES
- Consistent welding technique and ability to maintain required weld size and profile.
- Ability to identify obvious fit-up, alignment, or drawing problems before welding.
- Good mechanical aptitude, measurement skills, and attention to detail.
- Ability to work from drawings and written instructions with limited supervision once assigned.
- Ability to coordinate effectively with fitters, material handlers, supervision, and Quality personnel.
SAFETY & QUALITY EXPECTATIONS
- Regularly stand, bend, stoop, kneel, reach, climb, and work around large structural assemblies.
- Lift and handle welding equipment, tools, leads, and fabrication materials within safe working limits.
- Work around welding arc, sparks, grinding, heat, noise, fumes, overhead lifting, and moving shop equipment.
- Must be able to wear required PPE and safely work in a structural fabrication environment.
PHYSICAL & WORK ENVIRONMENT
- Follow company safety requirements, PPE rules, hot-work procedures, and safe material-handling practices.
- Perform work in accordance with drawings, weld symbols, WPS requirements, and job specifications.
- Do not weld assemblies that are visibly incorrect or questionable without obtaining clarification.
- Protect completed work from unnecessary damage and report defects, drawing conflicts, or material concerns.
- Maintain a clean and organized work area to reduce hazards and improve fabrication efficiency.
COMPENSATION & BENEFITS
- Pay is dependent on experience, skills, and qualifications. Insurance benefits are available after successful completion of the probationary period.
Job details
- Published
- September 17, 2026
- Last checked
- November 17, 2026
- Job source
- jazzhr
- Workplace
- On-site · Ponca City, US
- First seen
- November 14, 2026
Requirements
Previous structural steel welding experience preferred. Ability to pass the applicable M J & H Fabrication structural weld test(s). Ability to read structural shop drawings. Working knowledge of structural welding practices. Experience with welding processes in structural fabrication preferred.
Skills mentioned in this job
LiftmyCV exclusive data
Ponca City Development Authority hiring intelligence
Ponca City Development Authority currently has 86 active jobs tracked by LiftmyCV. 43 new jobs in the past 7 days.
Verified November 17, 2026
Active openings
86
Currently tracked by LiftmyCV
New in 7 days
43
53 new jobs in the past 30 days
Published salaries
14%
Median disclosed salary: $36,924
Average opening age
29 days
Across 86 active openings
Workplace breakdown
Hiring countries
Top hiring cities
Most in-demand roles
- • Truckload Coordination Director / Driver Manager
- • 1st Shift FSQS Tech
- • 2nd Shift FSQS QSM
- • 2nd Shift FSQS Supervisor
- • 2nd Shift FSQS Tech
- • 2nd Shift Maintenance Electrician
Frequently requested skills
Median disclosed salary: $36,924 · 14% of jobs publish a salary
As of November 17, 2026
Hiring insights calculated from active jobs tracked by LiftmyCV.
See how well you match this job
Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.
Sign up to see your matchAlready have an account? Log inMore at Ponca City Development Authority
Similar jobs from this company
Across the market
Similar jobs from other companies
- Structural WelderCornerstone Building BrandsMonticello, USOn-site$52,000–$56,160 per year
- Structural WeldervalmontTulsa, USOn-site$54,612–$59,568 per year
- Structural WelderCrown Technical Systems, LlcFontana, USOn-site$45,685–$61,658 per year
- Structural WelderHITACHI GLOBAL AIR POWER US, LLCFarmington, USOn-site
- Structural WelderDiligent ServicesBoca Raton, USOn-site$48,000–$62,400 per year
- Structural WelderLoenbroRock Springs, USOn-site
Third-party content disclaimer
Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.
LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.
LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.
If you prefer, you may apply directly via the original listing for transparency.