Wafer Integration Technician
Job description
Job Details:
Job Description:
- Supports wafer-level manufacturing process integration and yield activities through hands-on execution of engineering tests, experiments, inspections, measurements, data collection, and manufacturing support.
- Performs physical and technical inspections and tests to identify defects, abnormalities, and failure conditions that may contribute to yield loss or product performance issues.
- Supports electrical validation, fault isolation, and physical defect investigation of products that fail manufacturing or electrical test requirements.
- Collects, reviews, and interprets inline, parametric, defect, test, and end-of-line manufacturing data according to established procedures to support yield and process investigations.
- Supports lot disposition activities for inline defects, parametric results, and end-of-line data according to established criteria and engineering guidance.
- Executes approved lot setup plans, engineering lots, test runs, and experiments in support of process integration, yield improvement, process characterization, and manufacturing readiness.
- Conducts engineering tests and controlled experimental activities to collect data supporting process, integration, defect, and yield investigations.
- Prepares records, charts, summaries, and reports of experimental and manufacturing results to identify deviations from established specifications and quality standards.
- Supports monitoring of Statistical Process Control (SPC), manufacturing process controls, and other established indicators to identify abnormalities or potential excursions.
- Documents and communicates findings from defect, failure, yield, and experimental investigations to Process Integration and Yield Engineering, Module/Process Engineering, Manufacturing, and other relevant stakeholders.
- Supports investigation of manufacturing excursions by collecting relevant process, equipment, metrology, defect, and product data and escalating abnormalities according to established procedures.
- Provides observations and technical input to Engineering regarding potential equipment, process, specification, or manufacturing improvements based on investigation and experimental results.
- Performs approved setup and operational activities on semiconductor processing, metrology, inspection, and test equipment required to support engineering and integration activities.
- Monitors and audits manufacturing activities against established procedures and specifications and provides guidance to manufacturing personnel within the technician's authorized scope.
- Supports continuous improvement of manufacturing standards, procedures, specifications, and quality controls based on approved engineering changes.
- Supports training and knowledge sharing with peers and manufacturing personnel to strengthen execution consistency and overall team capability.
- Performs assigned activities in accordance with applicable EHS, cleanroom, quality, manufacturing control, and Stop the Job requirements.
Qualifications:
- Education
- Diploma in Electrical Engineering, Electronics, Mechanical Engineering, Mechatronics, Manufacturing Engineering, Materials Engineering, Microelectronics, or a related technical field.
- Experience
- Fresh graduates are encouraged to apply.
- Relevant technical experience in semiconductor manufacturing, process integration, yield, defect analysis, failure analysis, metrology, test, or other high-volume manufacturing environments is an advantage.
- Preferred Qualifications
- Hands-on experience in semiconductor or wafer-level manufacturing processes within a high-volume manufacturing environment.
- Familiarity with process integration, manufacturing process control, yield analysis, defect detection, fault isolation, failure analysis, or excursion management.
- Familiarity with inline, parametric, defect, metrology, electrical test, or end-of-line manufacturing data.
- Familiarity with Statistical Process Control (SPC), basic statistics, data analysis, and manufacturing process monitoring.
- Knowledge of Design of Experiments (DOE) principles and experience supporting controlled engineering experiments is an added advantage.
- Experience supporting engineering lots, process characterization, process improvement, or manufacturing qualification activities is an added advantage.
- Familiarity with semiconductor processing, inspection, metrology, and test equipment.
- Experience interpreting specifications, manufacturing procedures, process limits, technical documentation, charts, and engineering data.
- Familiarity with systematic problem solving, failure modes, root-cause investigation, and manufacturing quality principles is an added advantage.
- Other Requirements
- Strong technical aptitude, analytical thinking, and systematic problem-solving skills.
- Ability to collect, organize, interpret, and communicate technical and manufacturing data accurately.
- Basic understanding of wafer-level semiconductor manufacturing processes and the relationship between process conditions, equipment performance, defects, electrical results, and product yield.
- Ability to recognize abnormal manufacturing, process, defect, or test conditions and escalate according to established procedures.
- Ability to work with semiconductor processing, test, inspection, metrology, and precision measurement equipment.
- Ability to interpret and follow technical documentation, specifications, process requirements, experimental instructions, and manufacturing procedures.
- Attention to detail and commitment to product quality, process control, data integrity, and manufacturing standards.
- Good communication and teamwork abilities, including the ability to work effectively with Process Integration and Yield Engineering, Module/Process Engineering, Manufacturing, Quality, and other technical teams.
- Willingness to learn and adapt to new semiconductor processes, technologies, analytical methods, and manufacturing systems.
- Comfortable working in a semiconductor cleanroom and high-volume manufacturing environment.
- This role requires regular onsite presence to fulfill essential job responsibilities.
- Willing and able to work shift schedules, including rotating day and night shifts, where required.
- Able to support factory ramp, engineering experiments, manufacturing excursions, and operational requirements based on business needs.
Job Type:
Shift:
Shift 9 A1 (Malaysia)
Primary Location:
Malaysia, Penang Additional Locations:
Posting Statement:
All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance.
Position of Trust
N/A *Job posting details (such as work model, location or time type) are subject to change. * ADDITIONAL INFORMATION: Intel is committed to Responsible Business Alliance (RBA) compliance and ethical hiring practices. We do not charge any fees during our hiring process. Candidates should never be required to pay recruitment fees, medical examination fees, or any other charges as a condition of employment. If you are asked to pay any fees during our hiring process, please report this immediately to your recruiter.
Job details
- Published
- October 29, 2026
- Job source
- myworkdayjobs
- Workplace
- On-site · Penang, MY
- First seen
- October 29, 2026
Requirements
- Education
- Diploma in Electrical Engineering, Electronics, Mechanical Engineering, Mechatronics, Manufacturing Engineering, Materials Engineering, Microelectronics, or a related technical field.
- Experience
- Fresh graduates are encouraged to apply.
- Relevant technical experience in semiconductor manufacturing, process integration, yield, defect analysis, failure analysis, metrology, test, or other high-volume manufacturing environments is an advantage.
- Preferred Qualifications
- Hands-on experience in semiconductor or wafer-level manufacturing processes within a high-volume manufacturing environment.
- Familiarity with process integration, manufacturing process control, yield analysis, defect detection, fault isolation, failure analysis, or excursion management.
- Familiarity with inline, parametric, defect, metrology, electrical test, or end-of-line manufacturing data.
- Familiarity with Statistical Process Control (SPC), basic statistics, data analysis, and manufacturing process monitoring.
- Knowledge of Design of Experiments (DOE) principles and experience supporting controlled engineering experiments is an added advantage.
- Experience supporting engineering lots, process characterization, process improvement, or manufacturing qualification activities is an added advantage.
- Familiarity with semiconductor processing, inspection, metrology, and test equipment.
- Experience interpreting specifications, manufacturing procedures, process limits, technical documentation, charts, and engineering data.
- Familiarity with systematic problem solving, failure modes, root-cause investigation, and manufacturing quality principles is an added advantage.
- Other Requirements
- Strong technical aptitude, analytical thinking, and systematic problem-solving skills.
- Ability to collect, organize, interpret, and communicate technical and manufacturing data accurately.
- Basic understanding of wafer-level semiconductor manufacturing processes and the relationship between process conditions, equipment performance, defects, electrical results, and product yield.
- Ability to recognize abnormal manufacturing, process, defect, or test conditions and escalate according to established procedures.
- Ability to work with semiconductor processing, test, inspection, metrology, and precision measurement equipment.
- Ability to interpret and follow technical documentation, specifications, process requirements, experimental instructions, and manufacturing procedures.
- Attention to detail and commitment to product quality, process control, data integrity, and manufacturing standards.
- Good communication and teamwork abilities, including the ability to work effectively with Process Integration and Yield Engineering, Module/Process Engineering, Manufacturing, Quality, and other technical teams.
- Willingness to learn and adapt to new semiconductor processes, technologies, analytical methods, and manufacturing systems.
- Comfortable working in a semiconductor cleanroom and high-volume manufacturing environment.
- This role requires regular onsite presence to fulfill essential job responsibilities.
- Willing and able to work shift schedules, including rotating day and night shifts, where required.
- Able to support factory ramp, engineering experiments, manufacturing excursions, and operational requirements based on business needs.
LiftmyCV exclusive data
Intel Corporation hiring intelligence
Intel Corporation currently has 16 active jobs tracked by LiftmyCV. 13 new jobs in the past 7 days.
Active openings
16
Currently tracked by LiftmyCV
New in 7 days
13
16 new jobs in the past 30 days
Published salaries
69%
Median disclosed salary: $140,255
Average opening age
4 days
Across 16 active openings
Workplace breakdown
Hiring countries
Top hiring cities
Most in-demand roles
- • Process Integration Development Engineer
- • 3DIC Device Development Engineer
- • Electrical Failure Analysis Engineer - Nanoprobing
- • Electrical Failure Analysis Engineer - Shift2 Nanoprobing
- • Firewall Network Security Engineer
- • GPU Compiler Engineer
Frequently requested skills
Median disclosed salary: $140,255 · 69% of jobs publish a salary
As of November 18, 2026
Hiring insights calculated from active jobs tracked by LiftmyCV.
See how well you match this job
Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.
Sign up to see your matchAlready have an account? Log inMore at intel
Similar jobs from this company
- Ethernet System Integration EngineerIntel CorporationUnited States, USOn-site
- Process Integration and Yield TechnicianIntel CorporationPhoenix, USOn-site$51,710–$99,770 per year
- Manufacturing Technician Day Shift 7Intel CorporationPhoenix, USOn-site$51,710–$99,770 per year
- Process Integration Development Engineer PhD InternIntel CorporationHillsboro, USOn-site$120,898–$120,902 per year
- TEM TechnicianIntel CorporationHillsboro, USOn-site$70,670–$99,770 per year
- Manufacturing Equipment Technician (MTE) - Days Backend Shift - Shift 7Intel CorporationUnited States, USOn-site
Across the market
Similar jobs from other companies
- Wafer Process Integration TechnicianIntel Elect Malaysia Sdn BhdPenang, MYOn-site
- Wafer Fabrication Integration EngineerhpCorvallis, Oregon, United States of AmericaOn-site
- Wafer Probe Integration EngineerMicron Technology, Inc.Boise, ID - Main SiteOn-site
- Wafer Dicing TechnicianTeledyne Scientific & Imaging, LLCCamarillo, USOn-site$51,600–$68,800 per year
- Principal Wafer Bonding Integration EngineernEye.aiSanta Clara, USOn-site
- Wafer Equipment Maintenance TechnicianWestern DigitalFremont, USOn-site
Third-party content disclaimer
Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.
LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.
LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.
If you prefer, you may apply directly via the original listing for transparency.