Electrical Integration Quality Control Inspector
Job description
About Us:
Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environment a Job Duties: l, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957 we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently.
Job Summary:
The Electrical Integration QC Inspector is responsible for verifying the quality, accuracy, and completeness of electrical installation and integration activities within e-houses, modular electrical buildings, switchgear assemblies, power distribution units (PDUs), relay panels, control panels, and associated electrical systems. This position performs in-process and final inspections of electrical equipment installation, cable and conductor routing, terminations, grounding and bonding, panel interfaces, wire identification, electrical connections, and applicable test documentation. The inspector verifies compliance with approved electrical drawings, wiring diagrams, bills of materials (BOMs), customer specifications, manufacturer instructions, applicable codes, and company quality procedures. The inspector works closely with Electrical Production, Electrical Engineering, Testing, Assembly QC, and the QC Supervisor to identify discrepancies early, prevent nonconforming work from advancing, verify corrective actions, and ensure electrical assemblies are ready for designated testing and final release.
Job Duties:
- Review approved drawings, wiring diagrams, BOMs, customer specifications, and manufacturer instructions; confirm materials are correct, prior inspections are complete, and open nonconformances are dispositioned before work proceeds.
- Inspect installation of switchgear, PDUs, transformers, relay and control panels, and other equipment for correct parts, ratings, orientation, mounting, clearances, and service access.
- Inspect wire and cable routing, support, segregation, bend radius, protection, identification, and terminations against wiring diagrams and cable schedules.
- Verify grounding and bonding connections, conductor sizes, surface preparation, and torque documentation; coordinate continuity and bonding tests with qualified personnel.
- Verify panel wiring, device tags, terminal numbering, and labels against schematics and terminal plans; coordinate point-to-point verification and functional checks.
- Confirm required inspections are complete before testing; witness or verify specified electrical tests and review results, test equipment calibration, and acceptance criteria.
- Ensure failed tests are documented, affected work is held, and corrective action and retesting are completed.
- Inspect for electrical safety hazards, missing barriers or covers, required labeling, and debris or foreign objects in enclosures; immediately escalate critical safety concerns.
- Identify and document defects, place nonconforming work on hold, and initiate NCRs with drawing references, photographs, and measurements or test results.
- Notify the QC Supervisor, Electrical Production, and Engineering of significant defects or drawing conflicts; do not independently approve substitutions or deviations, perform energized testing, or authorize energization outside approved qualifications and procedures.
- Verify completed rework and identify recurring defects for corrective action.
- Complete inspection checklists, travelers, torque records, NCRs, and test documentation, maintaining traceability to equipment, project numbers, and drawing revisions.
- Confirm hold points and records are complete before work advances; perform final integration inspections before testing, customer inspection, or release.
- Communicate inspection status, open issues, and release restrictions during daily production meetings.
Job details
- Published
- October 28, 2026
- Job source
- jworkable
- Workplace
- On-site · Houston, Texas
- First seen
- October 28, 2026
LiftmyCV exclusive data
Panelmatic hiring intelligence
Panelmatic currently has 10 active jobs tracked by LiftmyCV. 9 new jobs in the past 7 days.
Active openings
10
Currently tracked by LiftmyCV
New in 7 days
9
10 new jobs in the past 30 days
Published salaries
—
Not published by this employer yet
Average opening age
5 days
Across 10 active openings
Workplace breakdown
Hiring countries
Top hiring cities
Most in-demand roles
- • Business Transformation Director
- • Compliance Specialist
- • Electrical Designer
- • HSE Technician
- • Maintenance Technician - 2nd Shift
- • Materials Lead
Frequently requested skills
As of November 21, 2026
Hiring insights calculated from active jobs tracked by LiftmyCV.
See how well you match this job
Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.
Sign up to see your matchAlready have an account? Log inMore at Panelmatic
Similar jobs from this company
- CNC Machine Operator - 2nd ShiftPanelmaticConroe, USOn-site
- General LaborerPanelmaticBrookfield Center, USOn-site
- Assembly Weld Technician- PEC- 1st ShiftPanelmaticHouston, USOn-site
- Assembly Weld Technician- PEC- 2nd ShiftPanelmaticHouston, USOn-site
- Continuous Improvement ManagerPanelmaticConroe, USOn-site
- Industrial ElectricianPanelmaticBrookfield Center, USOn-site
Across the market
Similar jobs from other companies
- Electrical Quality Control InspectorEnergy Resilience Partners, LLCIllesheim, DEOn-site
- Electrical Quality Control Inspector (Nuclear)Black & McDonald LimitedPickering, CAOn-site
- Electrical Quality InspectorCrusoeTulsa, OK - United States (2)
- Quality Inspector -ElectricalIS International ServicesAlpharetta, Georgia, United StatesOn-site
- Quality Inspector - ElectricalHanmiGlobal SaudiRiyadh, Saudi ArabiaOn-site
- Electrical Quality InspectorLedcor Management LimitedMerritt, CAOn-site
Related job searches
Third-party content disclaimer
Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.
LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.
LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.
If you prefer, you may apply directly via the original listing for transparency.