First Article Molder
Teledyne Technologies is seeking a First Article Molder to set up, validate, and execute prototype molding builds using advanced techniques. The role involves ensuring the accuracy of molding processes, troubleshooting issues, and maintaining high-quality standards. The ideal candidate will be hands-on with strong attention to detail and experience in working with various materials. This position offers an opportunity to make a significant impact on production processes in diverse industries like aerospace, defense, and medical imaging.
Job description
Job Description
General Overview
The First Article Molder is responsible for the setup, validation, and execution of first article and prototype molding builds using transfer, injection, and dispensing equipment for polyurethane, neoprene, epoxy, and similar materials. This role is critical to ensuring that molding processes are properly established, verified, and repeatable prior to production release. The operator is expected to take ownership of mold setup accuracy, process parameters, material handling, and part quality, while proactively identifying and resolving issues during initial builds. This position requires a strong balance of hands-on equipment operation, technical troubleshooting, and attention to detail to ensure successful first-pass quality.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
First Article Setup & Process Validation
- Perform complete setups for first article and prototype molding jobs, including mold selection, fixture preparation, and machine configuration.
- Establish and verify process parameters (temperature, pressure, cure times, etc.) to meet product specifications.
- Run initial cycles and evaluate results to confirm process capability and repeatability.
- Identify any setup or process gaps and make real-time adjustments to achieve acceptable results.
Molding Operations (Hands-On Execution)
- Safely operate molding equipment including injection, transfer, and dispensing machines.
- Load materials, operate press controls, and monitor cycles to ensure proper curing and formation of parts.
- Remove molded components and perform necessary trimming, handling, or staging for next operations.
- Maintain active engagement in production while ensuring strict adherence to first article requirements.
Material Handling & Processing
- Handle and prepare polyurethane, epoxy, neoprene, and similar materials in accordance with specifications.
- Monitor material condition (pot life, expiration, mix consistency) and ensure proper use.
- Detect and report defective, expired, or non-conforming materials prior to use.
Quality Validation & Inspection
- Perform detailed in-process inspections of molded components during first article runs.
- Verify parts meet dimensional, visual, and functional criteria prior to release.
- Distinguish acceptable vs. non-conforming parts and stop/adjust process as needed.
- Complete required first article documentation, inspection records, and deviation reports accurately.
Troubleshooting & Process Improvement
- Proactively identify molding defects such as voids, flash, cure issues, surface defects, or incomplete fills.
- Troubleshoot issues related to tooling, materials, or machine parameters.
- Make controlled adjustments to process settings to resolve issues and improve outcomes.
- Escalate issues when needed, but demonstrate ownership in problem-solving first.
Tooling, Fixtures & Equipment Care
- Inspect molds, tooling, and fixtures prior to setups to ensure readiness.
- Identify wear, damage, or cleanliness issues impacting part quality.
- Coordinate cleaning, maintenance, or repair needs with appropriate teams.
- Maintain equipment and workspace in accordance with 6S standards.
Documentation & Communication
- Accurately complete shop orders, labor tracking, process records, and quality documentation.
- Record process changes, deviations, and observations during first article builds.
- Communicate clearly with leads, supervisors, and engineering teams regarding build status and issues.
Safety & Compliance
- Follow all safety procedures, particularly when working with heated equipment, pressurized systems, and chemical materials.
- Ensure compliance with all quality standards and company policies.
- Maintain a safe, clean, and organized work environment.
Supervisory Responsibilities
This position does not supervise other employees.
Qualifications/Requirements
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience
- Minimum High School diploma or equivalent.
- Minimum 3 years production experience in a manufacturing environment.
- Experienced molding with materials such as Polyurethane, neoprene, epoxy, and EPDM preferred.
- Knowledge of material behavior and its impact on molding outcomes.
- Ability to read and interpret production drawings, process sheets, and work instructions.
- Experience with identifying defects and performing quality inspections.
- Must be able to see colors for the wiring sequences of the connectors, and possess good vision (corrected vision is acceptable) to perform visual inspection of product quality and to identify defects.
- Capable of standing for a minimum of 8-hour shift.
- Ability to lift, carry, push and pull 10-20 pounds on a frequent basis.
- Ability to read, write and speak the English language at a level that allows for the comprehension of detailed instructions and the legible completion of paperwork.
- Ability to assess condition of mold tooling, make recommendations for maintenance/cleaning, and improvements.
- Experience to select the correct mold for the shop order requirement.
- Experience to understand and adjust all equipment controls and settings per requirements.
- Knowledge to assess good parts from bad prior to moving to the next operation.
- Proficient at multi-tasking and prioritizing workflow.
- Must have good manual dexterity to effectively use basic tools and equipment.
- Must be able to work overtime during the week and Saturday.
- Must have basic computer skills.
- Candidate must possess U.S. citizenship or be a 'U.S. Person'.
Salary Range
The anticipated salary range listed for this role is only an estimate.
Job details
- Published
- September 18, 2026
- Job source
- myworkdayjobs
- Workplace
- On-site · San Diego, US
- First seen
- September 19, 2026
See how well you match this job
Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.
Sign up to see your matchAlready have an account? Log inMore at Teledyne Instruments, Inc.
Similar jobs from this company
None listed.
Across the market
Similar jobs from other companies
Third-party content disclaimer
Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.
LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.
LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.
If you prefer, you may apply directly via the original listing for transparency.