LiftmyCVLiftmyCV
FU

QC Inspector

Flowserve US IncOn-siteSpringville, US
AI job summary

The QC Inspector role at Flowserve entails ensuring that products and equipment meet rigorous inspection, manufacturing, and testing standards. This position focuses on calibration, maintaining certification records, and collaborating with engineers and technicians on design improvements. Responsibilities include inspecting components for quality compliance, auditing suppliers, and training personnel in proper measurement practices, with a strong emphasis on adhering to national and industrial standards.

Job description

Role Summary:

The Instrument Technician is responsible to ensure Flowserve products and equipment are inspected, manufactured, assembled, calibrated, and tested according to Flowserve procedures and certifying agency requirements. This position will require the retention of certification records. The Instrument Technician will also work with engineers and other technicians on basic design.

Responsibilities & Requirements:

  • Calibrate, adjust, and maintain all measuring devices, gages and test equipment.
  • Collect and maintain calibration records electronically and in paper form (where applicable).
  • Run reports and track costs associated with gage calibration, repair, and replacement.
  • Oversee and assist in all outsourced calibration. Assure that all outsourced calibration is traceable as per standards outlined by the National Institute of Standards & Technology (NIST). Including preparing of purchase orders for calibrating of gages.
  • Repair and/or replace all damaged gages; both in-house (where capability exists) and outsourced, where necessary.
  • Evaluate new and improved methods of inspection to trim inspection time and increase accuracy.
  • Inspect to ensure that all components comply with the quality standards.
  • Perform audits and inspections of suppliers, manufacturing processes, final product.
  • Create NCR’s and CAR’s to communicate non-conforming product issue to the responsible people.
  • Verify customer requirements are met on products through manufacturing, assembly, and test.
  • Understand the assembly and functioning of products for checking of completeness and quality at final inspection.
  • Help write, review, and implement quality procedures.
  • Train shop personnel in the proper use and care of measuring and test equipment.
  • Assist in the justification process for new or improved gauging and test equipment needs.
  • Repurpose and/or inventory all unused gages for dispersal to other sites as equipment needs dictate.
  • Provide consulting support and/or assist in gauging and calibration audits.
  • Assist in other QA areas if required.
  • Know associated national, international, and industrial standards.
  • Identify and implement testing procedures for certified equipment.
  • Update certification records as products and standards are changed.
  • Operate PMI and Spectrometer Analyzer for metal analysis and verification.
  • Implement programs for collection of data to be analyzed for continuous ongoing quality improvement.
  • Help resolve field problems associated with certified products.
  • Meet with vendors to establish Flowserve Quality requirements.
  • Follow all safety procedures and policies.
  • Ability to use measuring and inspection equipment.
  • Knowledge of Microsoft Office products and basic computer skills.
  • Good oral and written communication.
  • Good organizational skills.
  • Self-motivated and ability to work with minimal or no supervision.
  • Dexterity to use hand tools, ability to see and read fine print and markings, and able to lift up to 50 pounds.
  • Other duties as assigned.

Preferred Experience / Skills:

  • Experience in quality control or quality assurance inspection.
  • Experience in the electronic manufacturing industry.
  • Ability to inspect electronic PCBA’s including soldering, potting and conformal coat requirements.
  • Ability to operate a Multimeter.
  • Experience/knowledge of Hazardous Location requirements for Explosion Proof, Intrinsically Safe and Non-Incentive designs.
  • Understand NDE (radiography, magnetic particle, liquid penetrant, ultrasonic examination).
  • ASTM standards as applicable to material requirements and QA codes.
  • Experience with diagnostic testing.
  • HS Diploma / GED and 5-7 years relevant experience.

Job details

Published
July 21, 2026
Job source
myworkdayjobs
Workplace
On-site · Springville, US
First seen
July 31, 2026
AI match explained

See how well you match this job

Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.

Sign up to see your matchAlready have an account? Log in

More at Flowserve US Inc

Similar jobs from this company

None listed.

Across the market

Similar jobs from other companies

Third-party content disclaimer

Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.

LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.

LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.

If you prefer, you may apply directly via the original listing for transparency.