Robotics Software Engineer
AtomicSemi is seeking a Robotics Software Engineer to develop innovative software for semiconductor fabrication tools. The role involves tackling complex technical challenges related to sub-micron positioning, sensor integration, and real-time data processing. Candidates will work in a collaborative environment, interfacing with mechanical and electrical engineers. With a focus on speed, reliability, and creativity, the position offers an opportunity to contribute to a cutting-edge startup with a strong commitment to fair compensation and employee well-being.
Job description
About Atomic Semi
Atomic Semi is building a small, fast semiconductor fab. It’s already possible to build this with today’s technology and a few simplifications. We’ll build the tools ourselves so we can quickly iterate and improve. We’re building a small team of exceptional, hands-on engineers to make this happen. Mechanical, electrical, hardware, computer, and process. We’ll own the stack from atoms to architecture. Our team is optimistic about the future and we want to continue pushing the limits of technology. Smaller is better. Faster is better. Building it ourselves is better. We believe our team and lab can build anything. We’ve set up 3D printers, a wide array of microscopes, e-beam writers, general fabrication equipment - and whatever is missing, we’ll just invent along the way. Atomic was founded by Sam Zeloof and Jim Keller. Sam is best known for making chips in his garage, and Jim has been a leader in the semiconductor industry for the past 40 years.
About the Team
The Tool Software team builds the software that makes our semiconductor fabrication tools run, spanning everything from microcontroller firmware to Linux applications, assembly, calibration, and over-the-air deployment. We don't silo our engineers into narrow sub-domains. Because sensing, control, and physical hardware are deeply intertwined, you will have broad control over the design of the system from top to bottom.
About the Role
As a Robotics Software Engineer, you will build the algorithmically rich software that brings our fabrication tools to life. You will tackle deep technical challenges that demand sub-micron positioning, non-standard sensor modalities, and tight real-time constraints—fusing multi-sensor data into a single state estimate, optimizing trajectories under real mechanical constraints, and building computer vision pipelines for alignment and inspection. We do not draw sharp lines between "software problems" and "hardware problems" because the challenges we face rarely respect those boundaries. You will spend most of your time writing code, but you will also chase bugs across domains when needed. Whether a drifting sensor turns out to be thermal coupling from a nearby motor, or a non-converging controller is actually a mechanical backlash issue, you will follow the problem wherever it leads. We are open to a range of experience levels, from exceptional early-career engineers to staff-level builders. What matters most is that you are nimble, you understand how mechanical systems actually work, and you can seamlessly bridge the gap between pure code and real-world hardware. You will know you are successful when you have built fast, highly reliable software that solves these deep physical challenges and allows our tools to operate reliably.
Responsibilities
- Design and implement computer vision pipelines for alignment, metrology/inspection, object detection etc across our tools
- Build motion control and trajectory optimization for multi-axis systems, accounting for mechanical realities like backlash, compliance, and actuator nonlinearity
- Develop state estimation and sensor fusion routines that combine data from cameras, encoders, and custom sensors into reliable real-time estimates
- Write calibration procedures end-to-end — define what "calibrated" means for a new tool, implement the routines, and validate against ground truth
- Characterize and model physical systems from scratch, and build simulations that are faithful enough to catch bugs before they hit the lab
- Debug across the full stack when a problem demands it — from high-level planner, through firmware, to signals on the board
- Work directly with mechanical, electrical, and process engineers to integrate new robotic systems into production tools
Required Experience
- Bachelor’s degree or equivalent experience in a related field
- Strong programming skills in a systems language (C++, C, or Rust) and scripting experience in Python
- Proven experience shipping robotics or control software that ran on real, physical hardware — with attention to testing, logging, and failure modes
- Depth in at least two of: computer vision, state estimation/sensor fusion, motion control, trajectory optimization, calibration, systems modeling
- Ability to debug across domains, from high-level code down into firmware and electrical hardware
Nice-to-have
- Familiarity with precision motion — piezo stages, air bearings, flexures, or sub-micron positioning
- Experience with modern optimization frameworks, algorithms, cost-function tuning
- Experience with ML or RL frameworks applied to perception or control
- Experience with GPU-accelerated CV or real-time vision pipelines
- Basic EE lab chops: reading a schematic, using a scope or logic analyzer, chasing a noisy signal
- Experience with physics-based simulation (MuJoCo, Drake, Gazebo, Bullet, or custom)
Working at Atomic Semi
We’re an early-stage hardware startup with solid funding, world-class advisors, and a lab/office in San Francisco, CA.
Compensation
Atomic Semi is committed to fair and equitable compensation practices. The annual salary range for this role is $125,000 – $195,000. Compensation is determined based on your qualifications and experience. Our total compensation package also includes generous equity in Atomic Semi.
Benefits
Atomic Semi offers the following benefits, subject to applicable eligibility requirements:
- Medical, Dental, and Vision insurance
- Generous Paid Time Off inclusive of Holidays and Sick Time
- Visa Sponsorship
- Life and Disability Insurance
- Paid Parental Leave
- 401(k) retirement plan
- Weekly Learning & Development opportunities
- Commuter Benefits including Parking and Late Night Uber rides from the office
- Lunches daily, Dinners 3x per week, Stocked Office Kitchen with Snacks and Spindrifts
We are an equal-opportunity employer and do not discriminate on the basis of race, religion, national origin, gender, sexual orientation, age, veteran status, disability or other legally protected statuses.
Export Control Analysis
This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls.
Job details
- Published
- April 22, 2026
- Last checked
- April 28, 2026
- Job source
- ashby
- Workplace
- On-site · San Francisco, US
- First seen
- April 22, 2026
See how well you match this job
Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.
Sign up to see your matchAlready have an account? Log inVisa sponsorship insights
Visa sponsorship available
This job posting states that visa sponsorship is available for qualified candidates.
More at Atomic Semi
Similar jobs from this company
None listed.
Across the market
Similar jobs from other companies
- Robotics Software EngineerAtomic SemiSan Francisco, USOn-site$125,000–$195,000 per year
- Robotics Software EngineerOpenAISan Francisco, USOn-site
- Robotics Software EngineerNimble RoboticsSan Francisco, USOn-site$140,000–$210,000 per year
- Robotics Software EngineerMLabsSan Francisco, California, United StatesOn-site
- Robotics Software EngineerAeronesRiga, Riga, LatviaOn-site
- Robotics Software EngineerChefRoboticsSan FranciscoOn-site
Third-party content disclaimer
Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.
LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.
LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.
If you prefer, you may apply directly via the original listing for transparency.