LiftmyCVLiftmyCV
AI

Wire Harness Technician

AIMOn-siteSeattle, US

Job description

AIM builds autonomy for the real world - robots that move mountains. Our systems fuse software, hardware, robotics, and mission-critical infrastructure into ruggedized, safety-critical machinery operating on jobsites across the world. We replace decades of manual, error-prone, high-risk work with intelligent machines that reshape how earthmoving is done. Build, fabricate, and inspect high-reliability wire harness and cable assemblies for autonomous programs. Work from engineering drawings and controlled documentation to deliver harnesses that meet spec the first time. A successful entry-level Wire Harness Technician independently builds and inspects harnesses to drawing and IPC/WHMA-A-620 spec with minimal rework, flags ambiguous drawings or missing documentation rather than guessing, and can be trusted to sign off their own work — but escalates any spec conflict, safety concern, or non-standard fix to an engineer or lead rather than deciding it themselves.

Responsibilities

  • Cut, strip, crimp, solder, and terminate wire and cable per engineering drawings, wiring diagrams, and work instructions.
  • Build wire harness and electro-mechanical assemblies to IPC/WHMA-A-620 workmanship standards.
  • Read and interpret cable harness drawings, layout drawings, mechanical drawings, schematics, and GD&T.
  • Install connectors, terminals, heat-shrink tubing, cable ties, labels, and protective sleeves.
  • Perform continuity, insulation resistance, and functional electrical checkouts using digital multimeters and custom test setups.
  • Inspect completed harnesses for correct pinout, mechanical durability, and workmanship; flag and document non-conformances.
  • Perform basic rework and repair — de-pin/re-pin terminals, splice corrections — on returned or in-process assemblies.
  • Collaborate with production and manufacturing engineers to document and improve build processes.
  • Maintain a clean, organized, and safety-focused work area; follow all safety procedures and PPE requirements.

Requirements

  • High school diploma or equivalent.
  • 1-5 years of experience using mechanical and/or electronic hand tools.
  • Ability to read and follow wiring diagrams, schematics, and assembly drawings.

Preferred Skills and Experience

  • Experience fabricating or inspecting wire harness and cable assemblies.
  • Familiarity with IPC/WHMA-A-620 standards (certification a plus).
  • Experience in aerospace, defense, heavy equipment, automotive or another high-reliability manufacturing environment.
  • Experience with Altium.
  • Comfort working in a fast-paced, low-volume/high-mix production environment with shifting priorities.

Physical Requirements

  • Ability to work at a bench or on a vehicle for extended periods.
  • Ability to lift up to 20 lbs as needed.
  • Good vision and hand-eye coordination for detailed wiring work

Hard skills

  • Crimping, soldering, and connector termination to a recognized workmanship standard (IPC/WHMA-A-620 or equivalent).
  • Reading and working directly from wiring diagrams, schematics, and mechanical/GD&T drawings without hand-holding.
  • Using a digital multimeter and basic test setups to verify continuity, resistance, and functional pass/fail.
  • Diagnosing and correcting a wiring defect (not just reporting it) — re-termination, splice repair, de-pin/re-pin.

AIM-specific attributes

  • Comfort with ambiguity — AIM's build documentation and BOMs change often as harnesses go through revisions; the technician has to build correctly today and adapt tomorrow without a finished, static work instruction.
  • Safety-first mindset — works around live electrical systems and heavy equipment; stops and flags rather than pushing through an unsafe condition to hit a deadline.
  • Ownership of outcomes — treats a harness with their name on it as their responsibility through inspection and test, not just through assembly.
  • Low-volume/high-mix tolerance — comfortable switching between harness types and revisions within a shift rather than expecting long, repetitive runs.

Compensation - $40,000-$75,000 base salary

Job details

Published
September 29, 2026
Last checked
November 18, 2026
Job source
ashby
Workplace
On-site · Seattle, US
First seen
September 29, 2026
AI match explained

See how well you match this job

Log in or sign up and Eva will compare your profile with this role, explain your strengths and show what to improve.

Sign up to see your matchAlready have an account? Log in

More at AIM

Similar jobs from this company

None listed.

Across the market

Similar jobs from other companies

Third-party content disclaimer

Full job descriptions are sourced directly from third-party applicant tracking systems (ATS), job boards, recruitment platforms, and employer career pages.

LiftmyCV does not claim ownership of this content or guarantee its accuracy or current availability. All original content is the intellectual property of the respective employers or other rights holders.

LiftmyCV hiring intelligence, availability checks, and related-job recommendations are generated from LiftmyCV data and public sources.

If you prefer, you may apply directly via the original listing for transparency.